Onkyo 29400095 instruction manual First Time Setup, Video Input Setup, Hdmi Input Setup

First Time Setup—Continued

Video Input Setup

HDMI Input Setup

If you connect a video component to HDMI IN, you must assign that input to an input selector. For example, if you connect your DVD/BD player to HDMI IN1, you must assign HDMI IN1 to the DVD/BD input selector.

If you’ve connected your TV to the AV receiver with an HDMI cable, you can set the AV receiver so that composite video and component video sources are upconverted* and output by the HDMI OUT. You can set this for each input selector by selecting the “- - - - -” option.

Composite video,
component video	HDMI
	IN
	OUT
Composite video,	HDMI
component video

1	Press the [RECEIVER] button fol-
	lowed by the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “Input Assign”, and then press [ENTER].

The “Input Assign” menu appears.

1. Input Assign

1.HDMI Input

2.Component Video Input

3.Digital Audio Input

3	Use the Up and Down [q]/[w] but-
	tons to select “1. HDMI Input”,
	and then press [ENTER].
	The “HDMI Input” menu appears.
	1–1.	HDMI Input
	DVD/BD	HDMI1
	VCR/DVR	HDMI2
	CBL/SAT	HDMI3
	GAME	HDMI4
	AUX	- - - - -
	TV/TAPE	- - - - -
	TUNER	- - - - -
	CD	- - - - -
	PORT	- - - - -

4	Use the Up and Down [q]/[w] but-
	tons to select an input selector,
	and use the Left and Right [e]/
	[r] buttons to select:
	HDMI1, HDMI2, HDMI3, HDMI4,
	HDMI5:
		Select the HDMI IN to which
		the video component has
		been connected.
	- - - - -:	Output composite video and
		component video sources
		from the HDMI OUT. The
		video output signal from the
		HDMI OUT is the one con-
		figured in “Component Video
		Setup” (see page 40).
	Each HDMI IN cannot be assigned to
	more than one input selector. When
	HDMI1 - HDMI5 have already been
	assigned, you must set first any unused
	input selectors to “- - - - -		” or you will
	be unable to assign HDMI1 - HDMI5
	to input selector.

5	Press the [SETUP] button.
	The setup menu closes.

Notes:

•For composite video and component video upconversion for the HDMI OUT, the HDMI Input setting must be set to “- - - - -”. See page 24 for more information on video signal flow and upconversion.

•When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automatically set to the same HDMI IN. See “Digital Input Setup” on page 41.

•The TUNER input selector cannot be assigned and is fixed at the “- - - - -” option.

•If you connect an input component (such as UP-A1 series Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to PORT selector.

•Do not assign the component connected with the HDMI input to the TV/TAPE selector when you set “TV Control” setting to “On” (see page 79). Otherwise, appropriate CEC (Consumer Electronics Control) operation is not guaranteed.

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

39