Onkyo 29400095 DTS Setting Neo6 Music, Audyssey Settings, Theater-Dimensional Setting

Advanced Setup—Continued

DTS Setting

Neo:6 Music

Center Image 0 to 5 (default: 2)

The DTS Neo:6 Music listening mode creates 6-channel surround sound from 2-channel stereo sources. With this setting, you can specify by how much the front left and right channel output is attenuated in order to create the center channel.

Setting a value [0] in the middle is set to hear a sound. Sound is spread in left and right (the outside) so that the set value is made big. Please adjust by liking.

Audyssey Settings

When the room correction and speaker setup is complete, the “Equalizer Settings” (page 69) will be set to “Audyssey” and the “Dynamic EQ” will be set to “On”.

Dynamic EQ	Off:	Audyssey Dynamic EQ off (default).
	On:	Audyssey Dynamic EQ on.

With Audyssey Dynamic EQ, you can enjoy great sound even when listening at low volume levels. Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. It does so by selecting the correct frequency response and surround volume levels moment-by-moment so that the content sounds the way it was created at any volume level—not just at reference level.

Dynamic Volume (see page 45)

Off: Audyssey Dynamic Volume™ off. Light: Light Compression Mode becomes active.

Medium: Medium Compression Mode becomes active.

Heavy: Heavy Compression Mode becomes active. This setting affects volume the most, causing all sounds to be of equal loudness.

Note:

After the room correction and speaker setup is completed, even if Equalizer Setting is set to other than “Audys- sey”, when Dynamic EQ is set to “On”, Equalizer Settings is set to “Audyssey”.

When Dynamic Volume is set to effective, Equalizer Setting is set to “Audyssey” and Dynamic EQ is set to “On”. When Dynamic EQ is set to “Off”, Dynamic Volume becomes “Off” automatically.

Theater-Dimensional Setting

Listening Angle	Wide: Select if the listening angle is 40 degrees (default).
	Narrow: Select if the listening angle is 20 degrees.
With this setting, you can optimize the Theater-Dimen-		Front left speaker	Front right speaker
sional listening mode by specifying the angle of the front

left and right speakers relative to the listening position.

Ideally, the front left and right speakers should be equidis-	20°/40°
tant from the listening position and at an angle close to
one of the two available settings.

71