Onkyo 29400095 instruction manual Lock Setup, Using the Video Settings

Advanced Setup—Continued

Lock Setup

With this preference, you can protect your settings by locking the setup menus.

1	Press the [RECEIVER] button followed by
	the [SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make sure the
	appropriate external input is selected on your TV.
2	Use the Up and Down [q]/[w] buttons to
	select “9. Lock Setup”, and then press
	[ENTER].
	The “Lock Setup” menu appears.
		9.	Lock Setup
		Lock	Unlocked
3	Use the	Left and Right [e]/[r] buttons to
	select:
	When the setup menus are locked, you cannot
	change any setting.
	Locked:
	Setup menus locked.
	Unlocked:
	Setup menus not locked.
4	Press the [SETUP] button.
	The setup menu closes.

Using the Video Settings

You can change various settings of the upconverted video signal.

RECEIVER

VIDEO

qwer

1	Press the [RECEIVER] button followed by
	the [VIDEO] button.
2	Use the Up and Down [q]/[w] buttons to
	select an item.
3	Use the Left and Right [e]/[r] buttons to
	change the setting.

Repeat this step for the other settings.

■Resolution (Reso)

You can specify the output resolution for the HDMI out- puts and have the AV receiver upconvert the picture res- olution as necessary to match the resolution supported by your TV.

See the “Video Resolution Chart” on page 102 to see how the AV receiver handles video input at different res- olutions.

Through: Select this to pass video through the AV receiver at the same resolution and with no conversion (default).

Auto: Select this to have the AV receiver automat- ically convert video at resolutions not sup- ported by your TV.

480p: Select this for 480p output and video con- version as necessary.

720p: Select this for 720p output and video con- version as necessary.

1080i: Select this for 1080i output and video con- version as necessary.

Note:

If the resolution is not supported by your TV, it is dis- played such as “(1080i)” on the AV receiver.

80