Onkyo 29400095 Controlling Other Components, If you can control component, Remote Mode Setup menu

Controlling Other Components—Continued

6

7

Use the arrow [q]/[w]/[e]/[r] buttons to select a character, and then press [ENTER].

Repeat this step from the 1st character to the 3rd character of the brand name. When you have entered the 3rd charac- ter, select “Search” and press [ENTER].

After searching, a list of the brand name appears.

8–1.	Remote Mode Setup
Category	—TV—
	TV
Brand	xxx

Sharp

:

:

:

Sony

Not Listed

If the brand name is not found:

Use the Right [r] button to select “Not Listed”, and then press [ENTER].

The brand name input panel appears.

Use the Up and Down [q]/[w] buttons to select brand, and then press [ENTER].

After searching, a remote control code and the input procedure appear. Try it.

8–1.	Remote Mode Setup
Code	—TV—
	xxxxx

1. While holding down Remote Mode

[ TV ], press and hold down [DISPLAY] (3 seconds).

2.Enter the 5-Digit remote control code.

3.Push [MUTING] to see if the TV responds.

4.Push Remote Mode [RECEIVER].

5.Choose “Works” or “Doesn’t work”.

Works

Doesn’t work (try next code)

8	If you can control component,
	use the Up and Down [q]/[w]
	buttons to select “Works”, and
	then press [ENTER].
	The “Remote Mode Setup” menu
	appears.

If you cannot control component, use the Up and Down [q]/[w] buttons to select “Doesn’t work (try next code)” and press [ENTER].

The next code is appear.

9	When you’ve finished, press the
	[SETUP] button.
	The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

87