Hardware Installation
2.7.14 J9 (LEDs and Switches)
This LED will light when the 5VSB power is active.
This LED will light when the hard drive is being accessed.
This LED will light when the system is in the Suspend mode.
ATX-SW: ATX Power Switch
Depending on the setting in the BIOS setup, this switch is a “dual function power button” that will allow your system to enter the Soft- Off or Suspend mode. Refer to
This switch will allow your system to enter the Suspend mode.
RESET: Reset Switch
This switch allows you to reboot without having to power off the system thus prolonging the life of the power supply or system.
SPEAKER: Speaker Connector
This connects to the speaker installed in the system chassis.
29