!Award BIOS Setup Utility
Soft-Off by PWR-BTTN
This category allows you to select the method of powering off your system.
Hold 4 Sec. Regardless of whether the Power Management field is enabled or disabled, if the power button is pushed and released in less than 4 sec, the system enters the Suspend mode. The purpose of this function is to prevent the system from powering off in case you accidentally “hit” or pushed the power button. Push and release again in less than 4 sec to restore. Pushing the power button for more than 4 seconds will power off the system.
PWR Lost Resume State
Keep Off When power returns after an AC power failure, the system’s power is off. You must press the Power button to
Turn On When power returns after an AC power failure, the system will automatically
Last State When power returns after an AC power failure, the system will return to the state where you left off before power failure occurs. If the system’s power is off when AC power failure occurs, it will remain off when power returns. If the system’s power is on when AC power failure occurs, the system will power- on when power returns.
Resume On Ring
With an external modem installed, the Modem
1.Make sure the computer system is powered off.
2.Connect the external modem to the COM 1 or COM 2 serial port.
3.Switch on the power of the external modem.
44