Microsoft IBUS-BAT-1370, System Board manual Power Management Setup, Spread Spectrum

Award BIOS Setup Utility

Method 2:

Press the <Insert> key and power button simultaneously, then release the power button first. You must keep-on pressing the <Insert> key until the power-on screen appears. This will allow the system to boot according to the FSB of the processor. Now press the <Del> key to enter the Award BIOS setup utility. Select “Chipset Features Setup” and set the “CPU/PCI Clock (MHz)” field to “Default” or an appropriate clock frequency.

Note:

When using a 66MHz FSB processor, the AGP clock is similar to the CPU’s external bus clock. When using a 100MHz FSB processor, the AGP clock is 2/3 of the CPU’s external bus clock.

Spread Spectrum

Leave this field in its default setting - Disabled. Do not alter this setting unless advised by an engineer or technician.

3.1.4 Power Management Setup

The Power Management Setup allows you to configure your system to most effectively save energy. If you like to use the soft power down feature of Windows 95/98, you must enable the Power Management below. Select Min. Power, Max. Power or User Defined. Either one can be used as long as it is NOT disabled.

	ROM PCI/ISA BIOS
	POWER MANAGEMENT SETUP
	AWARD SOFTWARE, INC.
ACPI Function	: Disabled
Power Management	: User Define
PM Control by APM	: Yes
Video Off Method	: DPMS
Video Off After	: Suspend
MODEM Use IRQ	: 3
Standby Mode	: Disabled
Suspend Mode	: Disabled
HDD Power Down	: Disabled
VGA Active Monitor	: Disabled
Soft-Off by PWR-BTTN	: Instant-Off
PWR Lost Resume State	: Keep Off
Resume on Ring	: Disabled
Resume on LAN	: Disabled
Resume on Alarm	: Disabled	ESC	: Quit	↑ ↓ → ←	: Select Item
		F1	: Help	PU/PD/+/-	: Modify
		F5	: Old Values	(Shift) F2	: Color
		F6 : Load Fail-Safe Settings
		F7 : Load Optimal Settings

The settings on the screen are for reference only. Your version may not be identical to this one.

!

41