Nokia M1112 manual Command line interface, Signal Direction MDI signal M5112-ter Minal

Interfaces and indicator lights

PIN	Signal
3	DSL1
4	DSL2

Table 3-2ADSL interface pin-out numbering

3.2Command line interface

The command line interface (CLI) is RS-232 interface with an RJ-45 mechanical connector. The pin-out numbering is shown in Table 3-3.

1 8

Figure 3-4	CLI connector
PIN	Signal	Direction	MDI signal
		M5112-ter-
		minal
1	107 DSR	–>	Data set ready
	(const. ON)
2	108 DTR	<–	Data terminal ready
3	109 DCD	–>	Data channel re-
	(const. ON)		ceived line signal de-
			tector
4	102 SG		Signal ground
5	103 TxD	<–	Transmitted data
6	104 RxD	–>	Received data
7	105 RTS	<–	Request to send
	(not in use)
8	106 CTS	–>	Clear to send
	(const. ON)

Table 3-3Command line interface pin-out numbering

C33907001SE_00 E Copyright Nokia Networks Oy 3-3