M1112 Administrator Manual
5.3.7Save Config page
When you change the configuration, all configuration changes are activated immediately without restart/reload. However, the configuration will not be saved into the nonvolatile memory. If M1112 is restarted or powered down without saving the configuration, the old configuration will be restored. Clicking the Save configuration button saves the configuration into the nonvolatile memory and the old configuration cannot be restored through the web interface.
Figure 5-11 Save Config page
5.4Command line interface (CLI)
M1112 can be managed locally through a command line interface (CLI). The local command line interface is accessed through the local management console on the back panel. The local management console interface is an asynchronous V.24/V.28
E Copyright Nokia Networks Oy | C33907001SE_00 |