Nokia M1112 manual Command Switch on/off PPP authentication, Command Set PPP username

Managing M1112

Command	Switch on/off PPP authentication
Description	Switches PPP authentication on/off on the specified
	ATM channel.
Syntax	[no] ppp authentication {mode}
Arguments	no switches off PPP authentication.
	chap mode selects Challenge Handshake Authentica-
	tion Protocol.
	pap mode selects Password Authentication Protocol.
	both-chap-papmode selects both authentication
	protocols.

Example

M1112(conf-vccx)#ppp authentication chap M1112(conf-vccx)#

Command	Set PPP username
Description	Sets the username used in PPP authentication.
Syntax	[no] ppp username <name-string>
Arguments	no deletes PPP username.
	name-stringis your PPP username. The maximum
	length of the username is 15 characters.

Example

M1112(conf-vccx)#ppp username ut32aj

M1112(conf-vccx)#

Command	Set PPP password
Description	Sets the password used in PPP authentication.
Syntax	[no] ppp password <passwd-string>
Arguments	no deletes PPP password.
	passwd-stringis the PPP password. The password
	must be 4...15 characters long.

Example

M1112(conf-vccx)#ppp password jfddslfj

M1112(conf-vccx)#

C33907001SE_00 E Copyright Nokia Networks Oy 5-51