Nokia M1112 manual Command Save configuration to file, Command Restore configuration

M1112 Administrator Manual

Command	Save configuration to file
Description	Saves the configuration to a file.
Syntax	save config {file<filename> startup user}
Arguments	filename is the name of the file in which you want to
	save the configuration.
	startup-configargument saves the configuration
	into a startup.cfg file.
	user saves the user configuration.

Example

M1112>save config startup-config

M1112>

Command	Restore configuration
Description	Restores the default or user configuration. You must
	have the admin privileges to issue this command. Re-
	start your M1112 after you have issued this command.
Syntax	restore config {default user}
Arguments	default argument restores the default configuration of
	M1112.
	user argument restores the user configuration. The
	user configuration can be made with admin rights only.

Example

M1112>restore config default

M1112>

Command	Clear counters
Description	Clears the statistics counters.
Syntax	clear {log eth atm bridge ppp ip}
Arguments	log argument rewinds the diagnostic log to the begin-
	ning of the log file.
	eth argument clears the Ethernet statistics counters.
	atm argument clears the ATM statistics counters.
	bridge argument clears the bridging counters.
	ppp argument clears the PPP counters.
	ip argument clears the IP statistics counters.

Example

M1112> clear log

M1112>

5-42 E Copyright Nokia Networks Oy C33907001SE_00