Nokia manual Command Reset subsystem, Command Logout, Command Fast restart M1112

Managing M1112

Command	Reset subsystem
Description	Resets subsystems.
Syntax	reset {log dsl ppp [vcc-id] arp bridge napt}
Arguments	log resets the diagnostic log subsystem.
	dsl resets the DSL subsystem. The DSL connection
	will be re-established.
	ppp resets the whole PPP subsystem. The PPP con-
	nection will be re-establihed. If you provide a VCC
	number (vcc-id), only that connection will be reseted.
	arp clears the ARP table.
	bridge clears the bridge table.
	napt resets the NAPT subsystem.

Example

M1112> reset bridge

M1112>

Command	Logout
Description	Logs out from the command line interface.
Syntax	logout
Arguments	None

Example

M1112>logout

Command	Fast restart M1112
Description	Restarts M1112 software.
Syntax	reload
Arguments	None

Example

M1112>reload

in progress...

C33907001SE_00 E Copyright Nokia Networks Oy 5-43