Nokia M1112 manual Password level command, Command Assign new password

Managing M1112

Password level command

Command	Assign new password
Description	Switches password on/off and sets a new password for
	different user levels. Note, that you must assign admin
	password before you can assign other passwords.
	When removing passwords, admin password must be
	removed last.
Syntax	[no] {user bridge-user router-user pptp-user napt-
	user admin} <passwd-string>
Arguments	no switches off user password.
	user argument sets the user privilege level password.
	User password gives no access to the configuration
	mode. Also, firmware download is not allowed on the
	user privilege level.
	bridge-usersets the bridge-user privilege level
	password. Bridge user can set static routes and enable
	VBRIDGE IP address.
	router-usersets the router-user privilege level pass-
	word. Router user can change log levels and host-
	name.
	pptp-usersets the PPTP-user privilege level pass-
	word. PPTP user can change VCCx description, DHCP,
	DNS and LAN/VBRIDGE configurations.
	napt-userset the NAPT-user privilege level pass-
	word. NAPT user can change VCCx description, LAN/
	VBRIDGE, NAPT servers (pinholes), PPP username/
	password/mode/autostop, DHCP, DNS configurations,
	and set static routes.
	admin sets the administrator privilege level password.
	Administrator can change all configuration parameters.
	Only the administrator is allowed to use file handling
	commands (copy, rename, etc.).
	passwd-stringis the new password.
Example

M1112> admin nokia

M1112

C33907001SE_00 E Copyright Nokia Networks Oy 5-47