Installation and Connections
Installation of the unit
Installation using the optional PIONEER stand or other mounting brackets
÷Please be sure to request installation or mounting of this unit by an installation specialist or the dealer where purchased.
CAUTION
÷Use only those stands or mounting brackets designated by Pioneer. If other
÷Assemble stands or mounting brackets correctly in accordance with the instructions provided or other applicable installation instructions.
÷Two or more people should always work together when installing or removing this unit.
÷The installation location selected should be fully capable of supporting the weight of this unit, and be a stable, flat, and even surface. If installed in other locations, the unit may fall or be damage.
÷After installation, take appropriate measures to prevent the installation from falling. The failure to take such measures could allow the unit to fall, causing injuries or damage.
Wall-mount installation of the unit
This unit has been designed with bolt holes for
÷Be sure to attach in 4 or more locations above and below, left and right of the center line.
÷Use bolts that are long enough to be inserted 12 mm to 18 mm into the main unit from the attaching surface for both a holes and b holes. Refer to the side view diagram in the accompanying illustration.
÷As this unit is constructed with glass, be sure to install it on a flat, unwarped surface.
CAUTION
÷Handles should not be removed or reattached by anyone other than the professional installation technician or service personnel.
÷When moving the display, it should always be carried by two persons holding the rear handles in the manner shown.
Never attempt to move the Plasma Display by holding only one of the handles.
English
CAUTION
When this unit is installed on a wall, the work should be done by a professional technician possessing the requisite technical knowledge and abilities; consult your dealer for more information. Improper or insufficient installation may result in accidents, damage or personal injury.
9
En