www.ti.com
DDR2 Memory Controller Registers
4.7Interrupt Raw Register (IRR)
The interrupt raw register (IRR) displays the raw status of the interrupt. If the interrupt condition occurs, the corresponding bit in IRR is set independent of whether or not the interrupt is enabled. The IRR is shown in Figure 25 and described in Table 31.
Figure 25. Interrupt Raw Register (IRR)
31 |
|
|
| 16 |
| Reserved |
|
|
|
|
|
|
| |
15 | 3 | 2 | 1 | 0 |
Reserved |
| LT | Reserved | |
|
| |||
LEGEND: R/W = Read/Write; R = Read only; W1C = Write 1 to clear (writing 0 has no effect); |
|
|
|
|
| Table 31. Interrupt Raw Register (IRR) Field Descriptions |
Bit | Field | Value | Description |
Reserved | 0 | Reserved | |
2 | LT |
| Line trap. Write a 1 to clear LT and the LTM bit in the interrupt masked register (IMR); a write of 0 has |
|
|
| no effect. |
|
| 0 | A line trap condition has not occurred. |
|
| 1 | Illegal memory access type. See Section 2.14 for more details. |
Reserved | 0 | Reserved |
48 | DDR2 Memory Controller | |
|
| Submit Documentation Feedback |