Sharp MX-7000N, MX-6200N, MX-5500N manual About this Manual, Please note

Page 4

ABOUT THIS MANUAL

This manual explains the procedures for using scan mode, USB memory mode, Internet fax mode, PC scan mode, and data entry mode on the machine.

Please note

•To use the Internet fax function, the Internet fax expansion kit must be installed.

•The application integration module is required to use the metadata transmission function.

•For information on installing the drivers and software cited in this manual, please refer to the Software Setup Guide and the manuals that are provided with the expansion kits.

•To use the network scanner function, basic network scanner settings, server settings including SMTP and DNS server settings, and destinations must be configured in the Web pages. Configure and store the settings as explained in this manual. These settings require a knowledge of your network environment and therefore must be configured by your network administrator.

•For information on your operating system, please refer to your operating system manual or the online Help function.

•The explanations of screens and procedures in this manual are primarily for Windows® XP. The screens may vary in other versions of Windows.

•Wherever "MX-xxxx" appears in this manual, please substitute your model name for "xxxx".

•Considerable care has been taken in preparing this manual. If you have any comments or concerns about the manual, please contact your dealer or nearest authorised service representative.

•This product has undergone strict quality control and inspection procedures. In the unlikely event that a defect or other problem is discovered, please contact your dealer or nearest authorised service representative.

•Aside from instances provided for by law, SHARP is not responsible for failures occurring during the use of the product or its options, or failures due to incorrect operation of the product and its options, or other failures, or for any damage that occurs due to use of the product.

Warning

•Reproduction, adaptation or translation of the contents of the manual without prior written permission is prohibited, except as allowed under copyright laws.

•All information in this manual is subject to change without notice.

Illustrations and the operation panel and touch panel shown in this manual

The peripheral devices are generally optional, however, some models include certain peripheral devices as standard equipment. The explanations in this manual assume that a saddle stitch finisher, punch module, and inserter are installed on the machine. For some functions and procedures, the explanations assume that devices other than the above are installed.

The display screens, messages, and key names shown in the manual may differ from those on the actual machine due to product improvements and modifications.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Scanner Guide Table of Contents Timer Transmission Hold Setting For Received Data PrintTo AN E-MAIL Address Inbound Routing Settings Basic Scanning ProcedureAbout this Manual Please noteManuals Provided with the Machine Manual name ContentsIcons used in the manuals Before Using the Machine AS a Network Scanner Network Scanner FunctionUSB memory mode Make Sure the Main Power Switch is in the on Position Main power indicator On positionMain power switch Power Save key/indicator Preparations for USE AS a Network ScannerSettings Required in the WEB Pages Storing Sender InformationInstalling Network Scanner Tool Storing a Destination for Scan to DesktopBase Screen Base screen of scan mode Address book screen USB memory mode Customizing displayed keysChecking what special modes are selected Address Review keyAddress Book Screen Change the display mode Touch the key of the mode or tab that you wish to displaySystem Settings Administrator Bcc Setting Touch the Sort Address keySystem Settings Custom Index Index displayChange the mode Select settingsScan Send Sequence Place the originalSpecial mode settings To cancel scanningEnter the destination Start scanning and transmissionTransmittable Original Sizes Original SizesSize of the Placed Original Icon Mode used Retrieving a Destination from the Address BookRetrieving a Destination Touch the Address Book keySpecify the destination Touch the To keyTo cancel selection of a destination Checking and Deleting the Selected DestinationsTouch the Address Review key Check the destinations and then touch the OK keyUsing a Search Number to Retrieve a Destination Touch the keyEnter the 3-digit search number Address with the numeric keysDisplay the address input screen Entering AN Address ManuallyEnter the destination address How to search Retrieving a Destination from a Global Address BookOpen the global address search screen Search for the destinationSelect the destination Touch the key of the desired destinationTo check the information stored in a destination If a screen for selecting the item to be used appearsTouch the Resend key Using the Resend FunctionTouch the key of the desired address Sending AN Image in Scan Mode Document glass Originals Document feeder traySwitch to scan mode and display the image settings screen Specify the orientation in which the original is placedTouch the Scan tab Touch the Original key Touch the appropriate orientation keyAAA AAA Press the Colour Start key Or the Black & White If the original was placed onDocument glass, replace it with the next Original and press the Colour StartSystem Settings Administrator Pre-Setting Mail Signature System Settings Administrator Image Send SettingsStoring a mail signature Changing the SUBJECT, File NAME, REPLY-TO, and Body Text Touch the Send Settings keyTo change the subject, touch the Subject key Enter the subject To change the file name, touch the File Name keyTo change Reply-To, touch the Reply-To key Touch a Pre-Set text key Touch the OK keyTo change the body text, touch the Body Text key Specify a user for Reply-To and touch the OK keyEnter the body text and touch the OK key System Settings Default Sender Set Touch the OK keySending AN Image in USB Memory Mode Touch the USB Mem. Scan tab Press Start When finished, press Read-End To cancel scanning to USB memory System Settings USB-Device CheckSystem Settings Administrator Scan Settings System Settings Administrator Disable Scan FunctionEntering a File Name Sending a FAX in Internet FAX Mode System Settings Administrator Rotation Sending SettingTouch the Internet Fax tab Touch the Original key Image rotationOriginal and press the Black & White Press the Black & White Start keyRepeat until all originals have been scanned System Settings Administrator I-Fax Send Settings Changing the SUBJECT, File NAME, and Body Text File name is entered in the same way as the subject Enter the body text and touch the OK key Place the original To cancel a specified destination Repeat steps 2 and 3 until all destinations are selectedPress the Colour Start key Or the Black & White Press the JOB Status key Display the jobs completed screenNot using document filing Using document filingDisplay details on the broadcast transmission Resend the image to the unsuccessful destinationsSending AN Internet FAX from a Computer PC-I-Fax Image Settings Resolution key File Format keyColour Mode key Original keySelect the mode and display the image settings screen Touch the 2-Sided Booklet key or the 2-Sided Tablet keySend Settings Resolution Specifying the original scan size by paper size Touch the Scan Size keySpecify the scan size Touch the appropriate original size key Touch the OK keySpecifying the original scan size by numerical values Touch the Size Input key Enter the scan size original sizeSpecifying the send size of the image Touch the Send Size keySpecify the send size Touch the desired send size key Touch the OK keyTouch the appropriate Image Orientation key Changing the Exposure and Exposure Mode Original Image Type Select the mode and display the exposure settings screenExposure When to select Setting DescriptionAdjust the exposure with Keys Read the displayed message and touch the OK keySelect the exposure and original image type Touch the Manual keySelect the resolution Changing the ResolutionTouch the key of the desired resolution Touch the OK key How to select the resolution Changing the format scan mode and USB memory modeSystem Settings Administrator Initial Resolution Setting Changing the File FormatSet the format Select the file type Select the compression ratioSystem Settings Administrator Initial File Format Setting Changing the format Internet fax mode System Settings Administrator Compression SettingSelect the file format Touch the Internet Fax tab Touch the File Format keySelect the mode and display the colour mode settings screen Changing the Colour ModeSelect the colour mode Scan mode, USB memory mode, Data entry mode Special ModesInternet fax mode OK key and Cancel key2nd screen 2in1 key Transaction Report keyStoring Scan Operations Programs Enter the address of each branch officeSelect additional settings Select the special modesRetrieve the stored program Touch the Program keyTouch the tab of the mode that you wish to use Erasing Peripheral Shadows on the Image EraseTouch the Special Modes key Touch the Erase keyTouch the desired erase mode Select the erase settingsSet the erasure width with the keys To cancel the erase setting System Settings Administrator Erase Width AdjustmentPlace the original face down on Scanning AN Original AS TWO Separate Pages Dual Page ScanDocument glass Select Dual Page Scan To cancel the dual page scan settingPress the Colour Start key Or the Black & White Start key Sending AN Image AT a Specified Time Timer Transmission Touch the Timer keySpecify the day Set the time with the keysSpecify the time hour, minute To cancel timer transmission Adjust the background suppression level Select the suppress background settingWhitening Faint Colours in the Image Suppress Background To cancel the background suppression setting Scanning Both Sides of a Card Onto a Single page Card Shot Touch the Card Shot keySpecify the original size Enter the original sizeTo cancel Card Shot Scanning Many Originals AT Once Job Build Select job build modeInsert the originals face up in the document feeder tray Colour Start key Black & White Start key To cancel the job build function Scanning Originals of Different Sizes Mixed Size Original Files createdTo cancel the Mixed Size Original setting Select the mixed size original settingSystem Settings Administrator Original Feeding Mode Scanning Thin Originals Slow Scan Mode Select slow scan modeTo cancel slow scan mode Sending TWO Pages AS a Single page 2in1 Originals Document feeder tray Document glassTouch the Original key Select 2in1Touch the Internet Fax tab To cancel 2in1 Changing the Print Settings for Transaction Report TransactionSelect print conditions Select the print conditions Touch the OK keyTo cancel the transaction report setting Example Pressing the tab in scan mode JOB Status ScreenJOB Queue Screen and Completed JOB Screen Job queue screen Complete screenJob key display 102 Operation When a JOB in the JOB Queue is Completed Timer transmission jobsReception jobs when Inbound Routing Settings are enabled Internet fax reception jobsChecking Completed Jobs Tab name Information displayedTouch the Yes key Select the job that you wish to stopIf you do not want to stop the selected job Giving Priority to a Scan Transmission JOB Select the job to which you wish to give priorityInformation Appearing in the Result Column Message ExplanationReceiving AN Internet FAX Internet faxes are received automaticallyFaxes are printed automatically BeepManually Receiving Internet Faxes 110 111 Touch the PC Scan tab to switch to PC Scan mode Basic Scanning ProcedureAt the machine Select Acquire Image from the File menu At your computerSelect Sharp MFP Twain K Click the Select button Select the location where the original is Select scan settingsPreview the image PlacedSelect scanning settings while viewing the image Click the Scanning buttonRotate button Image Size buttonTouch the Exit key in the touch panel Metadata Delivery Metadata Delivery Data EntryUsing third party software applications Preparations for Metadata TransmissionMetadata Transmission for Scan to Desktop Storing Metadata SetsSelect a metadata set Transmitting MetadataTouch the Data Entry tab Touch the Metadata Entry key Enter the selected metadata item When you have finished entering all items, touch the OK keyTouch the key of the value that you wish to enter Name entered Description Where entered Metadata field Metadata FieldsScanner GuideMODEL MX-5500N MX-6200N MX-7000N
Related manuals
Manual 72 pages 45.99 Kb Manual 146 pages 48.56 Kb Manual 76 pages 42.81 Kb

MX-5500N, MX-7000N, MX-6200N specifications

The Sharp MX-6200N, MX-7000N, and MX-5500N are advanced multifunctional printers designed for medium to large business environments. These models are known for their high-performance capabilities, robust features, and cutting-edge technology, making them ideal for streamlining office tasks and enhancing productivity.

The Sharp MX-6200N offers impressive print speeds of up to 62 pages per minute, ensuring rapid document production without compromising quality. It boasts a high-resolution output of 1200 x 1200 dpi, delivering sharp and vibrant prints. The intuitive 10.1-inch touchscreen interface provides easy navigation and streamlined access to various functions, including printing, scanning, copying, and faxing.

The MX-7000N takes performance a step further with print speeds peaking at 75 pages per minute. This model features advanced scanning capabilities, enabling users to digitize documents quickly with a dual scanning option that supports both one-sided and two-sided originals. Enhanced security features, such as data encryption and user authentication, ensure that sensitive information remains protected.

Meanwhile, the MX-5500N is positioned as a versatile solution with print speeds of up to 55 pages per minute. It features a large-capacity paper tray that can hold up to 3,300 sheets, significantly reducing the frequency of paper replenishment. This model also incorporates customizable workflows, which allow users to set predefined tasks for routine printing and scanning jobs, increasing efficiency.

All three models utilize Sharp’s advanced imaging technology, combined with a real-time image processing engine, for consistent, high-quality outputs across all document types. They support various media sizes and types, from standard letter and legal paper to envelopes and labels, providing flexibility in printing.

Networking capabilities are integral to each model, featuring both wired and wireless connectivity options for seamless integration into existing office infrastructure. Additionally, they are compatible with mobile printing solutions, enabling users to print directly from their smartphones or tablets.

Overall, the Sharp MX-6200N, MX-7000N, and MX-5500N multifunction printers are powerful tools designed to meet the diverse needs of modern businesses. Whether for high-volume printing, secure document management, or versatile scanning solutions, these models stand out for their reliability, efficiency, and user-friendly features, driving productivity in any work environment.
Top Page Image Contents