Sharp CS-2635RH Rounding Selector, Decimal Selector, Paper Feed KEY Conversion KEY

5/4

ROUNDING SELECTOR:

Example: Set decimal selector to “2”.

4 ⎟ 9 = 0.444 ... , 5 ⎟ 9 = 0.555 ...

4	9	5	9
	0.45		0.56
5/4	0.44		0.56
	0.44		0.55

Note: The decimal point floats during successive calculation by the

use of or .

If the decimal selector is set to “F” then the answer is always rounded down ().

DECIMAL SELECTOR:

Presets the number of decimal places in the answer.

In the “F” position, the answer is displayed in the floating decimal system.

PAPER FEED KEY

CONVERSION KEY:

This key is used to obtain a value by dividing a given number with a specified conversion rate.

CONVERSION KEY:

This key is used:

•to store the conversion rate (by the use of the rate setting mode selector).

•obtains a value by multiplying a given number with a specified conversion rate.

•to recall the presently stored rate for

check. Press first to clear the calculation register and reset an error

condition, then press . The conversion rate is printed with the

symbol “TC”.

LAST DIGIT CORRECTION KEY

CLEAR ENTRY KEY:

Clears numbers entered prior to use of a function key.

Also used to clear an overflow error caused by an entry.

6