Sharp AR-FX9 manual Storing Numbers Under Group Keys, 3GROUP KEY

Page 46

INITIAL SETTINGS

STORING NUMBERS UNDER GROUP KEYS

Group keys allow you to dial a group of fax numbers by simply pressing the appropriate Group key once. They are convenient for the Broadcasting function, which is used to transmit an original to a group of fax machines.

All Rapid keys can be programmed as Group keys. To program or clear a group key, follow the steps below. Note that one key cannot be programmed as both a Rapid key and a Group key at the same time.

●Up to 100 fax numbers can be stored in one Group key.

●Rapid Keys, Speed Dial numbers, and numbers directly entered with the numeric keys can be stored in Group Keys.

Storing/adding numbers in a Group Key:

1 Press the [MENU] key.

1,2,3,

1,2,3,

2 Press the [] key ( ) or [] key ( ) until "2:ENTRY MODE" appears, and then press the [OK] key.

Selection

"2:ENTRY MODE"

3 Press the [] key ( ) or [] key ( ) until "1:FAX NUMBER" appears, and then press the [OK] key.

Selection

"1:FAX NUMBER"

4 Press the [] key ( ) or [] key ( ) until "3:GROUP KEY" appears, and then press the [OK] key.

Selection

"3:GROUP KEY"

5 Press the [] key ( ) or [] key ( ) until "1:SET" appears, and then press the [OK] key.

Selection

"1:SET"

6 Press the [OK] key.

7 Press the Rapid key you wish to use as a Group key .

					To add numbers:
01	02	03	04	05	After pressing the Group
10	11	12	13	14	Key, press the [	] key
					Key, press the [	] key
06	07	08	09		( ) or [ ] key (	) to
15	16	17	18	SHIFT	select "1:YES" and then
					select "1:YES" and then

press the [OK] key.

8 Enter the numbers that you wish to store in the Group Key.

Enter the fax numbers using any of the following methods:

•Press a Rapid Key and then press the [OK] key.

•Enter a Speed Dial number with the numeric keys and then press the [OK] key.

•Enter a number with the numeric keys and then press the [OK] key.

•	One Group Key cannot be stored in
Note	another Group Key.

•A message will appear if you select a Rapid Key or Speed Dial number that is already stored in another Group Key.

9 Press the [OK] key.

1,2,3,

1,2,3,

44

Image 46

Contents AR-FX9 Important safety information Table of Contents Receiving Messages and SignalsSpecifications BroadcastingSelecting the transmission mode Quick Reference GuideDialing methods Sending a faxSending a fax to multiple destinations Broadcasting Selecting the reception modeStoring a fax job while another job is in progress List of FAX Functions Always Prints Error onlyOFF Never PrintsLOW MiddleMmddyyyy Polling Mode OFF Memory Poll ModeSerial Poll Mode Select a setting or enter information Selecting Settings for the FunctionPress the Mode Select key to select fax mode Press the Menu keyWall socket Connecting the Telephone Line CordConnections You hear a click AdapterFinal Preparations Connecting Other DevicesPart Names Power on and OFF Loading the Paper Tray Online Manual on the CD-ROMSPF/RSPF Part NamesFollowing illustration shows the part names of the AR-FX9 TEL TEL jack Line jack LinePress this key to adjust the contrast before sending faxes Press this key to select the mode of receptionPress this key to switch between upper and lower case 10 11 12This lights up when the power save function is activated Initial SettingsThis lights up when an original is placed in the SPF/RSPF Press this key to fax a two-sided originalUsing the Arrow Keys About the Liquid Crystal DisplayPress the key or key to set the ringer volume Adjusting the Ringing Volume18RINGER Volume 4USER Program13SEC 17BEEP Length21SEC To turn off the alarm, select 1OFF 19BEEPER VolumePress the key or key to set the alarm volume Selections are as followsFollowing characters can be entered with the numeric keys FAX SetupHOW to Enter Characters Characters that can be enteredEntering Your Name and FAX Number 2ENTRY Mode3OWN Passcode SET Press the OK key Press the Menu key Setting the Date and TimeWhen 24-hour format is selected, do not perform this step Press the Menu key Press the key or key to select AM or PM21DATE&TIME Format 1TIME Format2DATE Format Press the key or key to select the display orderFollow these steps to enable Daylight Saving Time Daylight Saving Time Setting5DAY Light Saving Direct transmission the Memory indicator is off Selecting the Transmission ModeMemory transmission the Memory indicator is lit Transmission takes place as follows in each modeSelecting the Reception Mode AR-FX9Press a numeric key to select the number of rings Press the key or key# of Rings Auto Select the number of rings you would like to use 0 toNumber of rings Selecting the Reception Paper Size# of Rings Manual Press the key or key to select the tray selection Setting the Tray Selection24TRAY Selection Selections are as follows 1AUTO 2TRAY 1 3TRAY8RECALL Times Busy Setting the Number of Recall TimesWhen the line is busy Enter the number of recall times 00 to9RECALL Times ERR When a communication error occursEnter the number of recall times 0 to Press the numeric keys to select the recall interval Setting the Recall Interval10RECALL INT. Busy Enter the recall interval 01 to11RECALL INT. ERR Enter the recall interval 00 toUse the following procedure to set the index function Setting the Index Function20INDEX Print 3RESO. Priority Setting Resolution PrioritySelections are as follows 1STANDARD 2FINE Setting UP the Machine for USE with a PC Modem 15FAX Signal RCV14REMOTE Reception Using the Remote Reception FunctionTurning on Remote Reception 13FAX Remote Number Press a numeric key to enter the Fax Remote Number22PBX Setting PBX SettingPBX setting Press the Clear ALL key to exit 1FAX Number Storing Numbers for Automatic Dialing Storing numbers Enter the fax number with the numeric keysEnter the name of the destination with the numeric keys 2CLEAR 3GROUP KEY Storing Numbers Under Group KeysEnter the numbers that you wish to store in the Group Key Enter a name for the Group Key with the numeric keys Return to to program another Group key2END 1FAX #Enter the numbers that you wish to delete Deleting numbers from Group KeysQuiet Detect Time Using the Machine with AN Answering Machine6A.M. Mode Press the Menu key Numeric keysIf Quiet Detect Time is not working properly Answering Machine Backup2AUTO Receive When using the document glass Size and WeightWhen using the SPF/RSPF Originals Suitable for FaxingUnsuitable Originals Choosing Suitable MediaSetting the Original Sending OriginalsGently close the SPF/RSPF HOW to USE the FAX FunctionMark Press the # key1DOC. Glass Size Optional Transmission SettingsOriginal Size Press the key or key to select the original sizeFine ResolutionContrast Super FinePress the Cover Sheet key Press the OK key Cover Sheet1COVER Sheet SET 2TX Message SET Message FunctionPress the Cover Sheet key Press the key or key to select a messagePlace the originals in the Rspf Press the 2-SIDED TX key until Desired setting appearsFollow these steps to fax a two-sided original Rapid KEY Dialing Dialing and TransmittingDirect Keypad Dialing Speed DialingDial the fax number of the receiving machine Normal Dialing Using the Speaker KEYChain Dialing To select 1SEND, and then pressPress the SPEED/SEARCH key twice Using the Search KEYRedialing Press the REDIAL/PAUSE key Press the Start keyIf the Memory Becomes Full While Scanning AN Original Canceling Deleting a Stored FAX JOB3MEMORY Status Using A.M. Mode Using Auto ModeUsing MAN. Mode Receiving FaxesOptional Reception Settings TWO-SIDED Reception AR-M155 onlyIf you 2OFF Receive Reduce16RCV Reduce Be printed on two sheetsWhen Using Manual Sending and Receiving Memory Substitute Reception into Memory0RX Data Transfer Data Transfer2FAX Number Special Functions 1DATA Transfer1YES Follow these steps to use the fax transfer functionAdjust the resolution and/or contrast settings if desired Transmission ReservationPress the Start key . Transmission will begin BroadcastingPress the Broadcast key DesiredBroadcasting using a Group key Press the appropriate Group key. Transmission will beginPolling 8POLLING ModePolling Serial Polling 9SERIAL Poll ModePress the Menu key Press the OK key 7MEMORY Poll Mode Setting up polling transmissionPolling Transmission Memory Polling Deleting originals from polling memory Press Key Until 7MEMORY Poll ModeAdding a original to polling memory Press Key Until 2CLEAR appears, and then press the OK key11SECURITY Select Press the Menu key Press the key or key to select 1ON1ON Fax machines you wantProgramming/deleting passcode numbers 4PASSCODE # ModeSelect 2CLEAR and press the OK key 1TIMER Mode Timer OperationsPress the key or key to select 1SET Canceling a Timer Transmission JOB 5ANTI Junk FAX Anti Junk FAX1ANTI Junk Select Another fax number To store junk fax numbers, use the following procedureIf you wish to store Return to stepTo clear junk fax numbers, use the following procedure If you wish to store another fax number, return to stepOperation in COPY, PRINTER, SCANNER, and FAX Modes Printing OUT Reports You can print out a list of group dialing numbersTroubleshooting Fax numbers designated as Anti Junk Fax numbersUse the following procedure to print out reports Currently activated User Program settingsPress the Report key 6AUTO Listing Activity Report Auto ListingPress the key or key to select 1ON and press the OK key Printing Transaction Reports 7PRINT SelectionTroubleshooting → Replace the TD cartridgeAudible Signals Messages and SignalsDisplay Messages Specifications Index Reports Reception modeTransmission mode Storing numbersIndex by Purpose Sending originalsSharp Manufacturing France S.A AR-FX9

Related manuals

Manual 104 pages 32.14 Kb