2
Installation
INSTALLING THE TD CARTRIDGE
1 | Open the bypass tray and then open the side cover while pressing the side cover | |
open button. | ||
|
Bypass tray
2 | Remove the CAUTION tape from the front cover and remove the two protective pins | |
from the fusing unit by pulling the strings upward one at a time. | ||
|
CAUTION tape | Protective pins |
|
3 | Push gently on both sides of the front cover to open the cover. |
|
4 | Remove the TD cartridge from the bag. Remove the protective paper. Hold the cartridge | |
on both sides and shake it horizontally four or five times. | ||
| ||
| Hold the tab of the protective cover and pull the tab to your side to remove the cover. | |
| 4 or 5 times |
12