Sharp Master Your Copying Features with AL-1551 Manual

Page 25

EXPOSURE ADJUSTMENT/PHOTO COPYING

Use the light () and dark () keys to adjust the exposure level.

3 If exposure level 2 is selected, the two left-handmost indicators for that level will light up simultaneously. Also, if level 4 is selected, the two right-handmost indicators for that level will light up simultaneously.

4

Set the number of copies using the copy quantity ( , ) keys and press the print

(

) key.

 

REDUCTION/ENLARGEMENT/ZOOM

Three preset reduction ratios and two enlargement ratios can be selected. The zoom function enables copy ratio selection from 50% to 200% in 1% increments.

1

Set the original and check the copy paper size.

 

 

Use the copy ratio selector key and/or zoom ( , ) keys to select the desired copy

2

ratio.

 

To verify a zoom setting without changing the zoom ratio, press and hold

down the copy ratio display (%) key. When the key is released, the display will return to the copy quantity display.

To reset the ratio to 100%, press the copy ratio selector key repeatedly until the 100% indicator lights up.

To select a preset copy ratio:

 

To select a zoom ratio:

 

 

 

Preset reduction and enlargement ratios

 

When a zoom ( or ) key is pressed,

are: 50%, 64%, 78%, 129%, and 200%

 

the ZOOM indicator will light up and the

 

 

zoom ratio will be displayed in the display.

 

 

 

3

Making copies

23

Image 25
Contents AL-1551 Or 1-877-SHARP-CC toll free/905-568-7140 in Canada For Your ProtectionContents Appendix Introduction Getting StartedConventions used in this manual High-speed laser copying Main FeaturesHigh-quality digital image Substantial copying functions Printer featureScan once/ Print many Environmentally friendly designPart Names Operation Panel Copier Installation InstallationBe sure to allow the required space around Unpacking Checking Packed Components and AccessoriesRemoving Protective Packing Materials Installing the TD Cartridge Loading Copy Paper installing the paper tray Corner hooks Power to Copier Initial settings of operation panel Power onPaper Making CopiesNormal Copying When using the original table When using the RspfWhen copying in a one-sided to two-sided mode When copying in the one-sided to one-sided modeWhen copying in the two-sided to two-sided mode When copying in the two-sided to one-sided modeEnsure that the desired paper tray is selected Stream feeding mode Exposure ADJUSTMENT/PHOTO CopyingREDUCTION/ENLARGEMENT/ZOOM To select a preset copy ratio To select a zoom ratioBypass Feed including special paper Press the tray select Preheat mode Toner Save ModeAuto power shut-off mode Special FunctionsToner Save Mode OFF Displaying Total Number of CopiesTD Cartridge Replacement Supplies and User MaintenanceTD Cartridge Drum Cartridge ReplacementDrum Cartridge Replacement Cabinet User MaintenanceOriginal table and original cover Transfer charger When copier is not in use Misfeed Removal Copier TROUBLE?Misfeed in the paper feed area Misfeed in the fusing areaMisfeed in the transport area Misfeed in the lower paper feed area Misfeed in the Rspf Misfeed Removal Problem Possible cause Solution See TroubleshootingIndication Cause and remedy See Status IndicatorsAutomatic Exposure Adjustment Appendix SpecificationsSpecifications Supply list Supply Part Numbers and StorageProper storage Moving Instructions TD Cartridge ReplacementNames IndexPacked components Paper Loading Special Page For users in the USA Sharp Electronics Corporation