Sharp AL-1551 operation manual Ensure that the desired paper tray is selected

Page 23

NORMAL COPYING

5	Ensure that the desired paper tray is selected.

●Paper sizes that can be used in the duplex copy mode are letter, legal, and

invoice. (When copying from the original table in the duplex copy mode, only letter size paper can be used.)

●The bypass tray cannot be used in the duplex copy mode.

	200%	MAX.
	129%	51/2x81/2 81/2x11
	100%	100%
	78%	81/2x14 81/2x11
	64%	81/2x11 51/2x81/2	ZO
	50%	MIN.	ZO
	50%	MIN.

	6	Set the number of copies using the two copy quantity ( ,	) keys when copying
	6	from the original table or copying in a 1-sided copy mode from the RSPF.

● Press the clear () key to clear an entry if a mistake is made.

● A single copy can be made with the initial setting, i.e., when “0” is displayed.

	● Press the right copy quantity key to set the unit
	digit from 0 to 9. This key will not change the
ZOOM	tens digit.

●Press the left copy quantity key to set the tens

digit from 1 to 9.

	Tens digit Unit digit
7	Press the print (	) key.
7

●To display the number of copies made in a continuous run, press the left

copy quantity key.

● To stop copying in the middle of a run, press the clear () key. Copying will stop and the number in the display will be reset to “0”.

3

Making copies

21

Image 23

Contents AL-1551 Or 1-877-SHARP-CC toll free/905-568-7140 in Canada For Your ProtectionContents Appendix Conventions used in this manual Getting StartedIntroduction High-quality digital image Main FeaturesHigh-speed laser copying Environmentally friendly design Printer featureSubstantial copying functions Scan once/ Print manyPart Names Operation Panel Copier Installation InstallationBe sure to allow the required space around Unpacking Checking Packed Components and AccessoriesRemoving Protective Packing Materials Installing the TD Cartridge Loading Copy Paper installing the paper tray Corner hooks Power to Copier Initial settings of operation panel Power onPaper Making CopiesNormal Copying When using the original table When using the RspfWhen copying in the two-sided to one-sided mode When copying in the one-sided to one-sided modeWhen copying in a one-sided to two-sided mode When copying in the two-sided to two-sided modeEnsure that the desired paper tray is selected Stream feeding mode Exposure ADJUSTMENT/PHOTO CopyingREDUCTION/ENLARGEMENT/ZOOM To select a preset copy ratio To select a zoom ratioBypass Feed including special paper Press the tray select Special Functions Toner Save ModePreheat mode Auto power shut-off modeToner Save Mode OFF Displaying Total Number of CopiesTD Cartridge Replacement Supplies and User MaintenanceTD Cartridge Drum Cartridge ReplacementDrum Cartridge Replacement Original table and original cover User MaintenanceCabinet Transfer charger When copier is not in use Misfeed Removal Copier TROUBLE?Misfeed in the paper feed area Misfeed in the fusing areaMisfeed in the transport area Misfeed in the lower paper feed area Misfeed in the Rspf Misfeed Removal Problem Possible cause Solution See TroubleshootingIndication Cause and remedy See Status IndicatorsAutomatic Exposure Adjustment Appendix SpecificationsSpecifications Proper storage Supply Part Numbers and StorageSupply list Moving Instructions TD Cartridge ReplacementNames IndexPacked components Paper Loading Special Page For users in the USA Sharp Electronics Corporation