OPERATION PANEL
200% | MAX. |
|
|
129% | 51/2x81/2 81/2x11 |
| |
100% | 100% |
|
|
78% | 81/2x14 81/2x11 |
| |
64% | 81/2x11 | 51/2x81/2 | ZOOM |
50% | MIN. |
| |
|
| ||
1
Original to copy key and indicators
:
sided originals.
Turn on Long Edge or Turn on Short Edge can be selected.
:
:
Exposure mode selector key and indicators
Use to sequentially select the exposure modes: AUTO, MANUAL or PHOTO. Selected mode is shown by a lit indicator. (p. 22)
Light and dark keys and exposure indicators
Use to adjust the MANUAL or PHOTO exposure level. Selected exposure level is shown by a lit indicator. (p. 22)
Use to start and terminate user program setting. (p. 27)
Alarm indicators
: Drum replacement required indicator (p. 30)
:Misfeed indicator (p. 35)
:TD cartridge replacement required indicator (p. 29)
RSPF indicator (p.19)
RSPF misfeed indicator (p.35)
Copy ratio selector key and copy ratio indicators
Use to sequentially select preset reduction/ enlargement copy ratios.
Selected copy ratio is shown by a lit indicator. (p. 23)
Zoom indicator (p. 23)
Copy ratio display (%) key (p. 23)
Display
Displays the specified copy quantity, zoom copy ratio, user program code, and error code.
ON LINE indicator
Lights up when the machine is used as a printer. For description of the ON LINE indicator, see the printer operation manual.
Power save indicator
Lights up when the copier is in a power save mode. (p. 26, 27)
Tray select key
Use to select a paper feed station (paper tray or bypass tray). (p. 24)
Paper feed location indicators
Light up to show the selected paper feed station.
Zoom keys
Use to select any reduction or enlargement copy ratio from 50% to 200% in 1% increments. (p. 23)
Copy quantity keys
●Use to select the desired copy quantity (1 to 99). (p. 18)
●Use to make user program entries. (p. 27)
Clear key
●Press to clear the display, or press during a copy run to terminate copying. (p. 18)
●Press and hold down during standby to display the total number of copies made to date. (p. 28)
Print key and ready indicator
●Copying is possible when the indicator is on.
●Use to set a user program.
Getting started
7