Sharp AL-1551 operation manual Bypass Feed including special paper

Page 26

3

Making copies

REDUCTION/ENLARGEMENT/ZOOM

To decrease or increase the zoom ratio rapidly, press and hold down the or key. However the value will stop at the preset reduction or enlargement ratios. To move beyond these ratios, release the key and then press and hold it

down again.

200%

MAX.

 

MAX.

 

 

 

 

 

129%

51/2x81/2

81/2x11

 

 

 

11

 

1

x 1

1

 

x

 

100%

100%

 

5 /2

8 /2

8 /2

 

 

 

100%

 

 

 

 

 

78%

81/2x14

81/2x11

 

 

 

 

 

1

x

1

x

11

 

64%

81/2x11

51/2x81/2

8 /2

14

8 /2

 

 

81/2x11

51/2x81/2

ZOOM

50%

MIN.

 

MIN.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Set the number of copies using the copy quantity ( , ) keys and press the print

(

) key.

 

BYPASS FEED (including special paper)

The bypass tray automatically feeds up to 50 sheets of standard copy paper and also feeds special papers such as transparency film and labels one sheet at a time. Copy paper measuring from 3-1/2" x 5-1/2" to 8-1/2" x 14" and in the weight range of 14 to 34.5 lbs. can be used in this tray. (For paper weighing from 28 to 34.5 lbs., 8-1/2" x 11" is the maximum size.)

1

Place the original(s) face up in the document feeder tray or face down on the original

table.

 

The original image must be smaller than the paper or media for copying.

If the original image is bigger than the paper or media, this may cause smudges on the edges of the copies.

2

Open the bypass tray and extend the tray.

 

24

Image 26 Contents
AL-1551 For Your Protection Or 1-877-SHARP-CC toll free/905-568-7140 in CanadaContents Appendix Conventions used in this manual Getting StartedIntroduction High-quality digital image Main FeaturesHigh-speed laser copying Scan once/ Print many Printer featureSubstantial copying functions Environmentally friendly designPart Names Operation Panel Installation Copier InstallationBe sure to allow the required space around Checking Packed Components and Accessories UnpackingRemoving Protective Packing Materials Installing the TD Cartridge Loading Copy Paper installing the paper tray Corner hooks Power to Copier Power on Initial settings of operation panelMaking Copies PaperNormal Copying When using the Rspf When using the original tableWhen copying in the two-sided to two-sided mode When copying in the one-sided to one-sided modeWhen copying in a one-sided to two-sided mode When copying in the two-sided to one-sided modeEnsure that the desired paper tray is selected Exposure ADJUSTMENT/PHOTO Copying Stream feeding modeTo select a preset copy ratio To select a zoom ratio REDUCTION/ENLARGEMENT/ZOOMBypass Feed including special paper Press the tray select Auto power shut-off mode Toner Save ModePreheat mode Special FunctionsToner Save Mode Displaying Total Number of Copies OFFSupplies and User Maintenance TD Cartridge ReplacementDrum Cartridge Replacement TD CartridgeDrum Cartridge Replacement Original table and original cover User MaintenanceCabinet Transfer charger When copier is not in use Copier TROUBLE? Misfeed RemovalMisfeed in the fusing area Misfeed in the paper feed areaMisfeed in the transport area Misfeed in the lower paper feed area Misfeed in the Rspf Misfeed Removal Troubleshooting Problem Possible cause Solution SeeStatus Indicators Indication Cause and remedy SeeAutomatic Exposure Adjustment Specifications AppendixSpecifications Proper storage Supply Part Numbers and StorageSupply list TD Cartridge Replacement Moving InstructionsIndex NamesPacked components Paper Loading Special Page For users in the USA Sharp Electronics Corporation