Sharp AL-1551 operation manual When copying in the one-sided to one-sided mode

Page 22

NORMAL COPYING

When copying a book or an original which has been folded or a crumpled original, press down the original cover lightly. If the original cover is not securely closed, the copies may be striped or blurred.

A book, an original which has been folded, or a crumpled original

3

4

Select the desired original to copy mode.

 

Making copies

A.When copying in the one-sided to one-sided mode:

Ensure that no indicator is lit among the original to copy indicators.

B.When copying in a one-sided to two-sided mode:

Use the original to copy key to select the desired one-sided to two-sided copying mode (Turn on Long Edge or Turn on Short Edge). See the illustrations on page 18.

C.When copying in the two-sided to two-sided mode:

Use the original to copy key to select the two-sided to two-sided copying mode. The originals must be set in the RSPF before this mode can be set (step 3).

D.When copying in the two-sided to one-sided mode:

Use the original to copy key to select the two-sided to one-sided copying mode. The originals must have been set in the RSPF in step 3.

A B C D

20

Image 22 Contents
AL-1551 For Your Protection Or 1-877-SHARP-CC toll free/905-568-7140 in CanadaContents Appendix Introduction Getting StartedConventions used in this manual High-speed laser copying Main FeaturesHigh-quality digital image Scan once/ Print many Printer featureSubstantial copying functions Environmentally friendly designPart Names Operation Panel Installation Copier InstallationBe sure to allow the required space around Checking Packed Components and Accessories UnpackingRemoving Protective Packing Materials Installing the TD Cartridge Loading Copy Paper installing the paper tray Corner hooks Power to Copier Power on Initial settings of operation panelMaking Copies PaperNormal Copying When using the Rspf When using the original tableWhen copying in the two-sided to two-sided mode When copying in the one-sided to one-sided modeWhen copying in a one-sided to two-sided mode When copying in the two-sided to one-sided modeEnsure that the desired paper tray is selected Exposure ADJUSTMENT/PHOTO Copying Stream feeding modeTo select a preset copy ratio To select a zoom ratio REDUCTION/ENLARGEMENT/ZOOMBypass Feed including special paper Press the tray select Auto power shut-off mode Toner Save ModePreheat mode Special FunctionsToner Save Mode Displaying Total Number of Copies OFFSupplies and User Maintenance TD Cartridge ReplacementDrum Cartridge Replacement TD CartridgeDrum Cartridge Replacement Cabinet User MaintenanceOriginal table and original cover Transfer charger When copier is not in use Copier TROUBLE? Misfeed RemovalMisfeed in the fusing area Misfeed in the paper feed areaMisfeed in the transport area Misfeed in the lower paper feed area Misfeed in the Rspf Misfeed Removal Troubleshooting Problem Possible cause Solution SeeStatus Indicators Indication Cause and remedy SeeAutomatic Exposure Adjustment Specifications AppendixSpecifications Supply list Supply Part Numbers and StorageProper storage TD Cartridge Replacement Moving InstructionsIndex NamesPacked components Paper Loading Special Page For users in the USA Sharp Electronics Corporation