Sharp AL-1551 operation manual Main Features, High-speed laser copying, High-quality digital image

Page 6

1

Getting started

CAUTIONS

Place the copier on a firm, level surface.

Do not install the copier in a humid or dusty location.

When the copier is not used for long time, for example for consecutive holidays,

turn the power switch off and remove the power cord from the outlet.

When moving the copier, be sure to turn the power switch off and remove the power cord from the outlet.

Do not cover the copier with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat radiation, damaging the copier.

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

SAFETY PRECAUTIONS

This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This means that the copier does not produce hazardous laser radiation. For your safety, observe the precautions below.

Do not remove the cabinet, operation panel or any other covers.

The copier’s exterior covers contain several safety interlock switches. Do not bypass any safety interlock by inserting wedges or other items into switch slots.

MAIN FEATURES

High-speed laser copying

Since warm-up time is zero, copying can be started immediately after the power switch is turned on.

First-copy time is only 9.6 seconds (normal mode).

Copying speed is 15 copies/min., which adapts to business use, allowing improvement of working efficiency.

High-quality digital image

High-quality image copying at 600 dpi can be performed.

In addition to the automatic exposure mode, the manual exposure can be adjusted in five steps.

The photo mode copying function allows clear copying of delicate halftone original images such as monochrome photos and color photos.

4

Image 6
Contents AL-1551 For Your Protection Or 1-877-SHARP-CC toll free/905-568-7140 in CanadaContents Appendix Getting Started IntroductionConventions used in this manual Main Features High-speed laser copyingHigh-quality digital image Scan once/ Print many Printer featureSubstantial copying functions Environmentally friendly designPart Names Operation Panel Installation Copier InstallationBe sure to allow the required space around Checking Packed Components and Accessories UnpackingRemoving Protective Packing Materials Installing the TD Cartridge Loading Copy Paper installing the paper tray Corner hooks Power to Copier Power on Initial settings of operation panelMaking Copies PaperNormal Copying When using the Rspf When using the original tableWhen copying in the two-sided to two-sided mode When copying in the one-sided to one-sided modeWhen copying in a one-sided to two-sided mode When copying in the two-sided to one-sided modeEnsure that the desired paper tray is selected Exposure ADJUSTMENT/PHOTO Copying Stream feeding modeTo select a preset copy ratio To select a zoom ratio REDUCTION/ENLARGEMENT/ZOOMBypass Feed including special paper Press the tray select Auto power shut-off mode Toner Save ModePreheat mode Special FunctionsToner Save Mode Displaying Total Number of Copies OFFSupplies and User Maintenance TD Cartridge ReplacementDrum Cartridge Replacement TD CartridgeDrum Cartridge Replacement User Maintenance CabinetOriginal table and original cover Transfer charger When copier is not in use Copier TROUBLE? Misfeed RemovalMisfeed in the fusing area Misfeed in the paper feed areaMisfeed in the transport area Misfeed in the lower paper feed area Misfeed in the Rspf Misfeed Removal Troubleshooting Problem Possible cause Solution SeeStatus Indicators Indication Cause and remedy SeeAutomatic Exposure Adjustment Specifications AppendixSpecifications Supply Part Numbers and Storage Supply listProper storage TD Cartridge Replacement Moving InstructionsIndex NamesPacked components Paper Loading Special Page For users in the USA Sharp Electronics Corporation