Sharp AL-1551 operation manual Supply Part Numbers and Storage, Supply list, Proper storage

Page 48

7

Appendix

SUPPLY PART NUMBERS AND STORAGE

When ordering supplies, please use the correct part numbers as listed below.

Be sure to use only genuine SHARP parts and supplies.

For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of SHARP copiers. Look for the Genuine Supplies label on the toner package.

Supply list

Supply

Part number

Usable life

TD cartridge

AL-100TD

Approx. 6,000 sheets*

 

 

 

 

AL-110TD

Approx. 4,000 sheets*

 

 

 

Drum cartridge

AL-100DR

Approx. 18,000 sheets

 

 

 

*Based on copying onto letter-type paper at 5% toned area

(The life of the TD cartridge which has been included in the copier at the factory is approximately 2,000 sheets.)

Proper storage

1.Store the supplies in a location that is:

clean and dry,

at a stable temperature,

not exposed to direct sunlight.

2.Store copy paper in the wrapper and lying flat.

Paper stored out of the wrapper or in packages standing on end may curl or get damp, resulting in paper misfeeds.

46

Image 48
Contents AL-1551 For Your Protection Or 1-877-SHARP-CC toll free/905-568-7140 in CanadaContents Appendix Getting Started IntroductionConventions used in this manual Main Features High-speed laser copyingHigh-quality digital image Printer feature Substantial copying functionsScan once/ Print many Environmentally friendly designPart Names Operation Panel Installation Copier InstallationBe sure to allow the required space around Checking Packed Components and Accessories UnpackingRemoving Protective Packing Materials Installing the TD Cartridge Loading Copy Paper installing the paper tray Corner hooks Power to Copier Power on Initial settings of operation panelMaking Copies PaperNormal Copying When using the Rspf When using the original tableWhen copying in the one-sided to one-sided mode When copying in a one-sided to two-sided modeWhen copying in the two-sided to two-sided mode When copying in the two-sided to one-sided modeEnsure that the desired paper tray is selected Exposure ADJUSTMENT/PHOTO Copying Stream feeding modeTo select a preset copy ratio To select a zoom ratio REDUCTION/ENLARGEMENT/ZOOMBypass Feed including special paper Press the tray select Toner Save Mode Preheat modeAuto power shut-off mode Special FunctionsToner Save Mode Displaying Total Number of Copies OFFSupplies and User Maintenance TD Cartridge ReplacementDrum Cartridge Replacement TD CartridgeDrum Cartridge Replacement User Maintenance CabinetOriginal table and original cover Transfer charger When copier is not in use Copier TROUBLE? Misfeed RemovalMisfeed in the fusing area Misfeed in the paper feed areaMisfeed in the transport area Misfeed in the lower paper feed area Misfeed in the Rspf Misfeed Removal Troubleshooting Problem Possible cause Solution SeeStatus Indicators Indication Cause and remedy SeeAutomatic Exposure Adjustment Specifications AppendixSpecifications Supply Part Numbers and Storage Supply listProper storage TD Cartridge Replacement Moving InstructionsIndex NamesPacked components Paper Loading Special Page For users in the USA Sharp Electronics Corporation