Sharp AL-1551 operation manual Drum Cartridge Replacement, TD Cartridge

Page 32

5

Supplies and user maintenance

TD CARTRIDGE REPLACEMENT

3

Install a new TD cartridge. To install the new cartridge, see page 12, INSTALLING

THE TD CARTRIDGE.

 

 

 

4

Close the front cover and then the side cover by pressing the round projections near

the side cover open button. The indicator will go out and the ready (

) indicator

 

will light up.

When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged.

DRUM CARTRIDGE REPLACEMENT

The useful life of the drum cartridge is approximately 18,000 copies. When the internal counter reaches approximately 17,000 copies, the drum replacement required ( ) indicator will light up indicating that replacement of the drum cartridge will be needed soon. For more information on purchasing the drum cartridge, see SUPPLY PART NUMBERS AND STORAGE on page

46.When the indicator begins to blink, the copier will stop operating until the cartridge is replaced. Replace the drum cartridge at this time.

Do not remove the protective cover on the drum portion (black paper) of a new drum cartridge before use. The cover protects the drum against external light.

1

Ensure that the bypass tray is open and then open the side cover while pressing the

side cover open button.

 

 

Then, push gently on both sides of the front cover to open the cover.

2

Gently pull the TD cartridge out while pressing the lock release button. To remove the

TD cartridge, see page 29, step 2.

 

3

Hold the handle of the drum cartridge and gently pull the cartridge out. Dispose of the

old drum cartridge in accordance with local regulations.

 

30

Image 32
Contents AL-1551 For Your Protection Or 1-877-SHARP-CC toll free/905-568-7140 in CanadaContents Appendix Conventions used in this manual Getting StartedIntroduction High-quality digital image Main FeaturesHigh-speed laser copying Printer feature Substantial copying functionsScan once/ Print many Environmentally friendly designPart Names Operation Panel Installation Copier InstallationBe sure to allow the required space around Checking Packed Components and Accessories UnpackingRemoving Protective Packing Materials Installing the TD Cartridge Loading Copy Paper installing the paper tray Corner hooks Power to Copier Power on Initial settings of operation panelMaking Copies PaperNormal Copying When using the Rspf When using the original tableWhen copying in the one-sided to one-sided mode When copying in a one-sided to two-sided modeWhen copying in the two-sided to two-sided mode When copying in the two-sided to one-sided modeEnsure that the desired paper tray is selected Exposure ADJUSTMENT/PHOTO Copying Stream feeding modeTo select a preset copy ratio To select a zoom ratio REDUCTION/ENLARGEMENT/ZOOMBypass Feed including special paper Press the tray select Toner Save Mode Preheat modeAuto power shut-off mode Special FunctionsToner Save Mode Displaying Total Number of Copies OFFSupplies and User Maintenance TD Cartridge ReplacementDrum Cartridge Replacement TD CartridgeDrum Cartridge Replacement Original table and original cover User MaintenanceCabinet Transfer charger When copier is not in use Copier TROUBLE? Misfeed RemovalMisfeed in the fusing area Misfeed in the paper feed areaMisfeed in the transport area Misfeed in the lower paper feed area Misfeed in the Rspf Misfeed Removal Troubleshooting Problem Possible cause Solution SeeStatus Indicators Indication Cause and remedy SeeAutomatic Exposure Adjustment Specifications AppendixSpecifications Proper storage Supply Part Numbers and StorageSupply list TD Cartridge Replacement Moving InstructionsIndex NamesPacked components Paper Loading Special Page For users in the USA Sharp Electronics Corporation