Sharp AL-1551 operation manual Displaying Total Number of Copies, Off

4

Special functions

USER PROGRAMS

3	Press the print (		) key. The entered program number will be steadily lit and the
	currently selected parameter number for the program will blink on the right side of the
	display.
	Select the desired parameter using the right copy quantity (							) key. The entered
4
	parameter number will blink on the right of the display.
	Program		Mode			Parameters
	No.
	1	Auto clear time		0	OFF	1	30 sec.	* 2	60 sec.
				3	90 sec.	4	120 sec. 5		10 sec.
	2	Preheat mode		0	30 sec.	1	60 sec.	* 2	90 sec.
	3	Auto power shut-		0	2 min.	* 1	5 min.	2	15 min.
		off timer		3	30 min.	4	60 min.	5	120 min.
	4	Stream feeding		0	OFF	* 1	ON
		mode
	5	Auto power shut-		0	OFF	* 1	ON
		off mode

Factory default settings are indicated with an asterisk (*).

5	Press the print (	) key. The right-hand number in the display will be steadily lit and
	the entered value will be stored.
	To change the setting or to set another mode, press the clear ( ) key. The
	copier will return to step 2.
	Press the light (	) or dark ( ) key to return to the normal copy mode.
6

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.

1	Press the clear ( ) key to reset the display to zero.
2	Press and hold down the clear ( ) key for approximately 5 seconds.The total number
	of copies will appear in two steps, each with three digits.

Example: Total number of copies is 1,234.

28