Sharp ER-A347A PLU/sub-department open price entries, Example Key operation Print

Example Key operation Print

1200 6

5

3d

520

A 4 A

PLU/sub-department (open price) entries

For another merchandise classification, the register provides a maximum of 7000* PLUs/sub-departments. PLUs are used to call up preset prices by a code entry. Sub-departments are used to classify merchandise into smaller groups under the departments. Every PLU and sub-department has a free code from 1 to 99999, and should belong to a department to obtain attributes of that department.

The register is pre-programmed to “PRESET” for entry type and zero (0) for unit price. To use PLU entries, their preset unit prices should be previously programmed. (Refer to the section “PLU/UPC” of “DEPT/PLU Programming” )

To use sub-department entries, change to “OPEN” or “OPEN&PRESET” entry type for each PLU code. * A total of 7000 codes, including UPC codes, can be programmed.

Enter a PLU code and press the pkey. If you not use a programmed unit price, you need to enter a unit price after pressing the pkey.

Procedure

		When using a programmed unit price
PLU code	p		Unit price *	A
(1 to 99999)			(max. 8 digits)

In case only preset price entry is allowed

NOTE When those PLUs for which the unit price has been programmed as zero (0) are entered, only

the sales quantity is added.
Example		Key operation		Print
		PLU entry	2 p
			16 p
	Sub-department		1200
	entry		A
			A

17