Sharp ER-A347 SD Card Mode, Inserting and removing an SD memory card, SD card formatting

Page 99

SD CARD Mode

You can exchange data through an SD memory card between your register and a PC when managing the data in your register by using the SHARP’s PC software “PC-Link”.

For “PC-Link”, consult your dealer.

You can also save all necessary data in the register to an SD memory card for backup.

To use the SD memory card function, select the “7 SD CARD MODE” in the mode selection window and perform the following operations.

This instruction manual describes only those operations needed on the register. For details, please refer to the help section in the “PC-Link”.

■■ Inserting and removing an SD memory card

The SD card slot is located on the front side of your register.

Inserting an SD memory card

Insert an SD memory card into the SD card slot with the printed SD logo facing upwards. Push the card in steady with a finger until it clicks and release it slowly.

Removing the SD memory card

Push the card in gently with a finger and release it. The card will come out.

NOTE

•This model supports SD cards only. Use of any other types of

SD cards such as mini SD, micro SD, etc. with an adapter is not supported.

•When inserting or removing the SD memory card, be sure to release it slowly. Otherwise, the card may pop out and injure your finger.

•Never touch or remove the SD memory card while it is accessed, otherwise the data stored in it may be damaged.

•Formatting the SD memory card erases all the data in it.

CAUTION: Never turn the power off, while the SD memory card is accessed.

■■ SD card formatting

When the SD card is not formatted yet, take the formatting operation.

Procedure

(1)Select “4 FORMATTING” in the SD CARD mode and press the Akey, the confirmation window is displayed.

(2)To perform the format operation, select OK and press the Akey. To cancel the operation, select CANCEL and press the Akey.

■■ Folder creating

A user folder can be created in the following location:

SHARP/ECRER3X7/nnnnnnnn (nnnnnnnn: user folder name)

Procedure

(1)Select “3 FOLDER CONTROL” in the SD CARD mode and press the Akey.

(2)Select “1 CREATE FOLDER” and press the Akey, the folder name entry window is displayed.

(3)Enter the required folder name and press the Akey. To cancel the operation, press the akey.

97

Image 99

Contents ER-A347 ER-A347A U.S.A Introduction Contents PLU/UPC EFT UPC or EAN code Rear view Parts and Their FunctionsExternal View Front viewPrinter Keyboard layout Function key list KeyboardOperator display Screen example 1 REG mode Sales information areaScreen example 2 Program mode DisplaysCustomer display Screen save mode Selecting an Operating Mode Mode selection windowOperating Modes Procedure Mode SelectionError Warning Prior to Making EntriesPreparations for Entries Selecting the Function from the Menu Error escape functionHelp Function Help menu and guidance messagesExample Key operation Print Entries Item EntriesSingle item entries Example Key operation Print PLU/sub-department open price entriesUPC entries Repeat entriesMultiplication entries 15 @Split-pricing entries @6 @Transaction Single item cash sale SicsPLU/UPC information inquiry view function Example Key operation Print 2505099887654302 p 750 a Including-tax subtotal complete subtotal Display of SubtotalsFinalization of Transaction Taxable subtotalCharge credit sale Cash or check sale that does not need any tender entryKey operation Print Tax CalculationAutomatic tax Manual taxTax status shift Tax deletePercent calculations premium or discount Auxiliary EntriesDiscount for item entries Example Key operation Print Discount entriesRefund entries Discount for a subtotal Example Key operation PrintPayment Treatment Printing of non-add code numbersCurrency conversion Example Preset conversion rate 0.8063 Conv 1 Key operation Received-on-account entriesExample Open conversion rate 1.275 Conv Key operation Print Example Key operation Paid-out entriesNo-sale exchange Bottle returnTraining Mode Correction of the Last Entry Direct Void CorrectionIndirect void by key sequence operation Indirect void by cursor operationIncorrect receipt Cancellation receipt Subtotal VoidCorrection after Finalizing a Transaction Procedure Example Special Printing FunctionCopy Receipt Printing Example Display Manager ModeEntering the Manager Mode Override EntriesTo take an X1 or X2 report Reading X and Resetting Z of Sales TotalsHow to take a X1/Z1 or X2/Z2 report View reportEAN-8 UPC-A UPC-E Daily Sales Totals General reportSample report Individual group total report on department Department reportFull group total report on department Transaction reportIndividual clerk report Sample report PLU/UPC report by associated departmentClerk reports Hourly reportSample X report Sample Z report Periodic Report SampleGeneral information Daily net reportProgramming Keyboard Layout Prior to ProgrammingMobile phone method How to Program Alphanumeric CharactersCharacter code Entering character codesProgramming Basic InstructionsProgramming screen Programming example Page PLU Range DEPT/PLU ProgrammingDepartment DEPT. Code Use the numeric entry Price Use the numeric entryMainte PLU rangeCOMMISSION2 Functional ProgrammingDiscount Sign Use the selective entryHalo High Amount Lockout Use the numeric entry Percent 0, %2 Commission rate Commission 1, Commission Cash in drawerTEND. Use the selective entry Media Key ProgrammingCash key Cash Footer Print Use the selective entryCheck key Check Charge key X, Y+TEXT Use the character entry Currency conversion CONV1, CONV2 Symbol Use the character entryFunction Text Programming Function Default textTotal Auto KEY Use the selective entry Personnel ProgrammingClerk Pass Code Use the numeric entryMode Pass Code ManagerTraining Clerk Date/Time Setting Terminal ProgrammingDate/time UPC Function Optional Feature SelectionBasic System TEND+DIRECT Use the selective entry Function ProhibitFunction Authority Function Selection ST Before Tend Use the selective entryAfter TRANS. Use the selective entry Print Selection UPC Function Journal Report ProgrammingZero skip Print select GT1 on Z Use the selective entryJournal Size Use the selective entry Counter Z1 General reportJournal data Message Programming Receipt logoReceipt Logo Use the character entry Keyboard Device Configuration ProgrammingDisplay PrinterEFT On-line RS port COM1, COM2SRM Sales Recording Module ScannerDoughnut Exempt Tax ProgrammingTax system TAX Rate Use the numeric entry Table tax ProcedureTax 1 through Interval Use the selective entryExample data of tax % Sample tax table Tax %Quantity Use the numeric entry Tax ProcedureDoughnut exempt Example data of above tax %Key Sequence Automatic Sequencing Key ProgrammingReading of Stored Programs Program reading sequenceDescription Departments Sample printoutsMedia FunctionsClerk Manager Function textOptional feature Mode pass code Training clerkMessage Report settingDevice configuration Auto key ROM version TaxEFT Test Function Folder creating SD Card ModeInserting and removing an SD memory card SD card formattingData saving Folder name selectingData loading Error message table of the SD card functionUPC or EAN code EAN-13ITF-14 Code entry No add-on code Digit add-on code Add-on codeOperator Maintenance Case of Power FailureCase of Printer Error How to set the paper roll How to cut the paper end Recording paper specificationsInstalling Paper Rolls Paper specification104 105 Replacing the journal paper roll Replacing the paper rollRemoving a Paper Jam Replacing the receipt paper rollCleaning the Printer Printer Head/Sensor/Roller Drawer Lock Key Drawer and Drawer Lock KeyRemoving the Till Opening the Drawer by HandBefore Calling for Service Fault CheckingError message table Specifications Warranty Disclaimer Clause DE Limitation DE Responsabilite Sharp Electronics Corporation

Related manuals

Manual 115 pages 27.64 Kb