Sharp ER-A347A instruction manual Data loading, Error message table of the SD card function

Page 101

■■ Data loading

The programming data can be loaded from the SD card.

Procedure

(1)Select “2 LOADING” in the SD CARD mode and press the Akey. The following selection window is displayed.

Item

Data list

 

 

 

Select the individual programming data:

 

DEPARTMENT

 

PLU/UPC

IND. PROGRAM

CLERK

 

GRAPHIC LOGO

 

LOGO TEXT

 

TAX

ALL PROGRAM

All programming data

ALL RAM DATA*

All RAM data

(2)Select the data menu from the list and press the Akey, the confirmation window is displayed. To load the programming data file, select OK and press the Akey.

To cancel the operation, select CANCEL and press the Akey.

*When “ALL RAM DATA” is selected, the register resets the program in the last save point after loading all the RAM data.

NOTE The loading operation must be circumspect in execution, the sales data and/or all programming data will be recovered with the back-up data.

Error message table of the SD card function

Error message (display)

Error status and action

 

 

 

The SD memory card is full. Delete unnecessary data from the card on a PC or

CARD FULL

replace the card with a new one. When using a new SD memory card, be sure

 

to format it in advance.

CARD PROTECT

The write-protect switch on the SD memory card is in the “PROTECTED”

position. Set the switch on the “NOT PROTECTED” position.

 

FILE FAILED

The data stored in the SD memory card is incorrect. Write correct data into the

SD memory card on a PC.

 

NO CARD

No SD memory card is found. Insert an SD memory card into the SD card slot

or reinsert it correctly.

 

NO FILE

The designated file is not found.

NO FOLDER

The user folder is not found. (SHARP/ECRER3X7/user folder name)

 

The maximum allowable number of times of sales data writing is exceeded.

OVER LIMIT.

Delete unnecessary data from the SD memory card on a PC or replace the

card with a new one. When using a new SD memory card, be sure to format it

 

 

in advance.

SD ACC POWER OFF

A power failure has occurred while the SD memory card is accessed. Perform

the interrupted operation again from the beginning after power recovery.

 

SD ERROR

An error other than the above mentioned has occurred while the SD memory

card is accessed. Perform the interrupted operation again from the beginning.

 

99

Page 100 Page 102
Image 101
Page 100 Page 102
Contents ER-A347 ER-A347A U.S.A Introduction Contents PLU/UPC EFT UPC or EAN code External View Parts and Their FunctionsFront view Rear viewPrinter Keyboard layout Function key list KeyboardScreen example 2 Program mode Screen example 1 REG mode Sales information areaDisplays Operator displayCustomer display Screen save mode Operating Modes Selecting an Operating ModeMode selection window Procedure Mode SelectionPreparations for Entries Error WarningPrior to Making Entries Selecting the Function from the Menu Error escape functionExample Key operation Print Help FunctionHelp menu and guidance messages Single item entries EntriesItem Entries Example Key operation Print PLU/sub-department open price entriesUPC entries Repeat entriesMultiplication entries 15 @Split-pricing entries @6 @PLU/UPC information inquiry view function Single item cash sale SicsExample Key operation Print 250 Transaction5099887654302 p 750 a Finalization of Transaction Display of SubtotalsTaxable subtotal Including-tax subtotal complete subtotalCharge credit sale Cash or check sale that does not need any tender entryAutomatic tax Tax CalculationManual tax Key operation PrintTax status shift Tax deletePercent calculations premium or discount Auxiliary EntriesRefund entries Discount entriesDiscount for a subtotal Example Key operation Print Discount for item entries Example Key operation PrintCurrency conversion Payment TreatmentPrinting of non-add code numbers Example Open conversion rate 1.275 Conv Key operation Print Example Preset conversion rate 0.8063 Conv 1 Key operationReceived-on-account entries No-sale exchange Paid-out entriesBottle return Example Key operationTraining Mode Correction of the Last Entry Direct Void CorrectionIndirect void by key sequence operation Indirect void by cursor operationCorrection after Finalizing a Transaction Incorrect receipt Cancellation receiptSubtotal Void Copy Receipt Printing Procedure ExampleSpecial Printing Function Entering the Manager Mode Manager ModeOverride Entries Example DisplayHow to take a X1/Z1 or X2/Z2 report Reading X and Resetting Z of Sales TotalsView report To take an X1 or X2 reportEAN-8 UPC-A UPC-E Sample report Daily Sales TotalsGeneral report Full group total report on department Department reportTransaction report Individual group total report on departmentClerk reports PLU/UPC report by associated departmentHourly report Individual clerk report Sample reportGeneral information Periodic Report SampleDaily net report Sample X report Sample Z reportProgramming Keyboard Layout Prior to ProgrammingMobile phone method How to Program Alphanumeric CharactersCharacter code Entering character codesProgramming screen ProgrammingBasic Instructions Programming example Page PLU Range DEPT/PLU ProgrammingDepartment DEPT. Code Use the numeric entry Price Use the numeric entryMainte PLU rangeCOMMISSION2 Functional ProgrammingHalo High Amount Lockout Use the numeric entry DiscountSign Use the selective entry Percent 0, %2 Commission rate Commission 1, Commission Cash in drawerCash key Cash Media Key ProgrammingFooter Print Use the selective entry TEND. Use the selective entry+TEXT Use the character entry Check key CheckCharge key X, Y Currency conversion CONV1, CONV2 Symbol Use the character entryFunction Text Programming Function Default textTotal Clerk Personnel ProgrammingPass Code Use the numeric entry Auto KEY Use the selective entryTraining Clerk Mode Pass CodeManager Date/time Date/Time SettingTerminal Programming UPC Function Optional Feature SelectionBasic System TEND+DIRECT Use the selective entry Function ProhibitFunction Authority After TRANS. Use the selective entry Function SelectionST Before Tend Use the selective entry Print Selection UPC Function Journal Report ProgrammingZero skip Journal Size Use the selective entry Print selectGT1 on Z Use the selective entry Journal data CounterZ1 General report Receipt Logo Use the character entry Message ProgrammingReceipt logo Keyboard Device Configuration ProgrammingEFT DisplayPrinter On-line RS port COM1, COM2SRM Sales Recording Module ScannerDoughnut Exempt Tax ProgrammingTax system Tax 1 through Table tax ProcedureInterval Use the selective entry TAX Rate Use the numeric entryExample data of tax % Sample tax table Tax %Doughnut exempt Tax ProcedureExample data of above tax % Quantity Use the numeric entryKey Sequence Automatic Sequencing Key ProgrammingDescription Reading of Stored ProgramsProgram reading sequence Departments Sample printoutsMedia FunctionsClerk Manager Function textOptional feature Mode pass code Training clerkMessage Report settingDevice configuration Auto key ROM version TaxEFT Test Function Inserting and removing an SD memory card SD Card ModeSD card formatting Folder creatingData saving Folder name selectingData loading Error message table of the SD card functionITF-14 UPC or EAN codeEAN-13 Code entry No add-on code Digit add-on code Add-on codeCase of Printer Error Operator MaintenanceCase of Power Failure Installing Paper Rolls Recording paper specificationsPaper specification How to set the paper roll How to cut the paper end104 105 Removing a Paper Jam Replacing the paper rollReplacing the receipt paper roll Replacing the journal paper rollCleaning the Printer Printer Head/Sensor/Roller Removing the Till Drawer and Drawer Lock KeyOpening the Drawer by Hand Drawer Lock KeyError message table Before Calling for ServiceFault Checking Specifications Warranty Disclaimer Clause DE Limitation DE Responsabilite Sharp Electronics Corporation
Related manuals
Manual 115 pages 27.64 Kb
Top Page Image Contents