Tax Programming
Use the following procedure to select any option included in the tax group:
NOTE The register is adapted to US and Canadian tax systems. If the Canadian tax system is required, the tax system must be changed (see page 83 for tax system selections), then program the tax rate or tax table and quantity for doughnut exempt which are described in this section.
Prior to the entry of sales transactions, the tax programming must be performed in accordance with the laws of the state. The register is provided with programming four different tax rate. The
If the taxable item is entered, the tax will be automatically added to merchandise subtotal according to the programmed tax status for the department. The tax can be also entered manually.
The register is provided with two types of tax programming methods. The % tax method is used for a straight percentage rate per dollar. The table tax method requires tax break information from the state or local tax offices. Use the method which is acceptable in the state. The necessary data of tax programming will be presented at local tax office.
Procedure
The screen continues.
1. In the SETTING window, select “12 TAX.”
•The TAX window will appear.
2.Select any option from the following options list:
1 | TAX SYSTEM | Tax system |
2 | TAX1 | Tax1 |
3 | TAX2 | Tax2 |
4 | TAX3 | Tax3 |
5 | TAX4 | Tax4 |
6 | DOUGHNUT EXEMPT | Doughnut exempt |
The following illustration shows those options included in this programming group.
12 TAX |
|
|
|
| 1 | TAX SYSTEM | l See “Tax system” on page 83. | |
|
|
|
| |||||
|
|
| 2 | TAX1 | l See “Tax 1 through 4” on page 84. | |||
|
|
| ||||||
|
|
| 3 | TAX2 | l See “Tax 1 through 4” on page 84. | |||
|
|
| ||||||
|
|
|
|
|
| 4 | TAX3 | l See “Tax 1 through 4” on page 84. |
|
|
|
|
|
| |||
|
|
|
|
|
| 5 | TAX4 | l See “Tax 1 through 4” on page 84. |
|
|
|
|
|
| |||
|
|
| 6 | DOUGHNUT EXEMPT | l See “Doughnut exempt” on page 86. | |||
|
|
|
82