Health Care System III | Advanced Use |
Auto-display still image
Select On to automatically display a received still image. If this selection is Off, you will have to press SELFVIEW to display a still image.
Still image filter
Select On to remove any instability in the high quality still image.
Utilities
Autoanswer
On: The system will automatically answer all incoming calls.
On+MicOff: The system will automatically answer all incoming calls and switch the microphone off when the call is connected. Press MICOFF to switch the microphone on.
Off: You must manually answer all incoming calls by pressing the CONNECT key.
Far end camera control
On: The far end will be able to:
•Control your camera
•Select your video sources
•Activate your presets
•Request still images
Off: None of the four features above on the local system can be accessed by the far end, however you will still be able to control the camera on the far end.
Dual Monitor
On: Selfview, still images and Duo Video will be displayed on the 2nd monitor.
Off: The 2nd monitor shows Selfview only.
Auto-PIP
On: Your selfview will automatically be displayed (as a
59