Advanced Use | Health Care System III |
Send Own Numbers
On The system will send its own numbers to the far end.
Off The system will not send its own numbers to the far end, but please note that the network may still send your numbers to the far end.
Sending Complete
On The system will send the ISDN message information element ‘Sending Complete’.
Off The system will not send ‘Sending Complete’.
ISDN-PRI Settings
NOTE
THE T1 FORMAT IS PREDEFINED TO ESF AND
THE LINE CODE IS B8ZS. THIS IS NOT
CONFIGURABLE.
NOTE
MANDATORY
TO MAKE SURE YOUR SYSTEM WILL WORK PROPERLY USING
-SET PRI SWITCH TYPE
-ENTER PRI LINE NUMBER
Number
Enter the main number for your PRI line. If this number is programmed and ‘MSN: On’ (see ‘Validate numbers’ in ‘Advanced ISDN Settings’) only calls to this number will be answered.
PRI Switch Type
Select the type of PRI network to which your unit is connected.
76