2
8.Use Table15 to configure your switch VTP Snooping parameters.
Table 15. VTP Snooping Parameters
Parameter | Definition |
|
|
VTP Snooping | Select to enable or disable the VTP snooping |
State | protocol globally for the switch. The default value |
| is Disabled. |
|
|
Domain | Enter the name associated with the Cisco VTP |
Name | domain. The default is Null. |
| Note: The domain name is automatically |
| learned within approximately five |
| minutes from a Cisco VTP switch provided |
| both the Domain Name is Null and the |
| VTP Snooping State is enabled on the |
| Cajun switch. |
|
|
Configuration | Displays the VTP snooping configuration revision |
Revision | number associated with the last successful VTP |
Number | configuration update on the Cajun switch. |
|
|
Updater | Displays the IP address of the Cisco switch that |
Identity | initiated the configuration update. |
|
|
Update | Displays the date and time that the Cisco switch |
Timestamp | initiated the configuration update. |
|
|
9.Click APPLY to save your changes, or CANCEL to restore previous settings.
Configuring Non-VLAN Switch Port Parameters
To configure
1.In the Switch Port Configuration dialog box, from the Allow Learning
For example, you can set this parameter to Disable, then add a static MAC address entry for this port.
2.From the Hunt Group
2 - 24 | Cajun P880 Routing Switch Installation Guide |