2
Table 12. Switch Port Configuration Parameters
Parameter | Definition |
|
|
VLAN Binding | Select the port’s VLAN binding type. |
| Refer to Table14 for more |
| information on VLAN binding |
| options. |
|
|
Automatic VLAN | Select to enable or disable the ability |
Creation | to automatically create a VLAN each |
| time the port receives a frame from an |
| unknown VLAN. The default is |
| Disable. |
|
|
VTP Snooping | Select to enable or disable VTP |
| Snooping on this port. The default is |
| Disable. |
|
|
Allow Learning | Select to enable or disable the port’s |
| learning of new addresses. The default |
| is Enable. |
|
|
Hunt Group | Select a hunt group for which this |
| port will be a member. The default is |
| None. |
|
|
Spanning Tree | Select to enable or disable spanning |
Mode | tree protocol on this port. The default |
| is Enable. |
|
|
Fast Start | Select to enable or disable fast start on |
| this port. The default is Disable. |
|
|
Known Mode | Select to enable or disable known |
| mode. The default is Disable. |
|
|
3Com Mapping | Select how incoming tagged frames |
Table | from 3Com equipment are mapped to |
| Lucent VLANs. The default is |
| 3ComDefault. |
|
|
Mirror Port | Displays whether the mirror port is |
| enabled or disabled. This is a Fast |
| Ethernet only option. |
|
|
2 - 20 | Cajun P880 Routing Switch Installation Guide |