Motorola P880 manual Password

*Note: Information you enter at the Login and Password prompts is case sensitive.

4.At the Login prompt, enter root. The password prompt displays.

Password:

5.At the Password prompt, enter root as the default password. The command line interface prompt displays.

6.Enter the command enable. This changes the command mode to privileged mode.

7.Enter the command configure. This changes the command mode to configure mode so that you can use the setup command.

8.Enter the command setup. This initiates a series of queries. Answer each query as follows:

a.When prompted to change the super user password, press Enter to accept the default answer of Yes.

b.Enter your old password. The system then prompts you for a new password. The default password is root.

c.Enter your new password, then re-enter the new password to verify your choice.

d.Enter the IP address for the switch manager’s Ethernet console.

e.Enter the subnet mask for the network’s IP address.

Cajun P880 Routing Switch Installation Guide 2 - 5