To enable Fast Start for ports on a module associated with a selected bridge:
1.In the System Configuration section of the Web Agent window, click Modules & Ports. The Module Information dialog box opens.
2.In the Switch Ports column, click on the switch port number listed for the selected module. The Switch Ports dialog box opens.
3.To set Fast Start mode on individual ports, in the Name column, click the port name for the selected module. The Switch Port Configuration dialog box opens.
Or
To set Fast Start mode on all ports in a module, click All Module Switch Port Configuration. The Switch Port Configuration on All Ports dialog box opens.
4.From the Fast Start
5.Click APPLY to save your changes, or CANCEL to clear your selection.
Using the All Ports Configuration Dialog Box
The All Ports Configuration dialog box allows you to apply the same parameter settings to all switch ports in a module using a single command.
To set all switch ports in a module using a single command:
1.In the System Configuration section of the Web Agent window, select Modules & Ports. The Module Information dialog box opens.
2.In the Ports column, click the number of ports listed for the module you want to configure (for example, 10 for 100BASE- FX). The Physical Port Configuration dialog box opens.
3.Click All Module Ports Configuration at the bottom of the dialog box. The All Ports Configuration dialog box opens.
4.Select the port on which you want your changes to occur.
Cajun P880 Routing Switch Installation Guide | 2 - 27 |