Rugged Outback ELX4-60 manual Playback via split screen, Playback with Digital Zoom

Page 17

BASIC CONFIGURATION

ELX4 -60

4.1.2. Playback via split screen

- Press the [MULTI] button during basic (single-channel) playback mode. - Channels 1 to 4 will be displayed in the quad-split screen.

- To display a single channel, press the corresponding number button on the front of the ELX4 -60.

4.1.3. Playback with Digital Zoom

-Press the [ZOOM] button during the basic (single-channel) playback mode.

-Digital Zoom will expand the image to twice its normal size.

-Default location of the digital zoom is in the center of screen. The zoom box can be moved each 10th

step to left and right and 4t h step up and down.

-To move the zoom box, use the [Arrow] button.

-To cancel the zoom box, press the [ZOOM] button once more.

4.1.4. Various playback modes

(PLAY) : To begin playback mode and replay at 1x speed . After pressing PAUSE (), PLAY will advance recorded images frame by frame.

- (STOP) : To stop replaying

- (PAUSE) : To pause replaying

- (FAST FORWARD) : Each press of the button will increase playback speed gradually (x1, x2, x4, x8, x16)

- (FAST REWIND) : Each press of the button will increase playback speed gradually (x1, x2, x4, x8, x16)

-STEP FORWARD : Pressing [, PLAY] or [ , FAST FORWARD] button from PAUSE status, will replay image frame by frame. In order to go back to normal playback mode, press [, STOP] button then press [ , PLAY] or [ , FAST FORWARD] button.

-STEP REWIND : Pressing [ , FAST REWIND] button from PAUSE status, will replay image frame

by frame. In order to go back to normal playback mode, press [, STOP] button then press [ , PLAY] or [ , FAST FORWARD] button.

Rugged CCTV

2003.05.21 (v 1.0)

17

Image 17

Contents User’s Guide Cctv Monitor User ELX4-60FCC Compliance Statement Important Notice Rugged Cctv ELX4Setting at Text menu Setting at Serial Setup’s RS232 menu Appendix #2 Utilizing IP Addresses on Local Network Introduction What is ELX4-60?ELX4-60 Key featuresFront Panel Product DescriptionDIO Rear PanelInstallation Summary Viewing basic screen Quad-split MonitoringViewing single full screen Viewing multi screenViewing all channels with sequence mode Viewing with connected PTZ Viewing an alarm triggered channelViewing images with Digital Zoom Save Preset Load PresetPan/Tilt Control Zoom/Focus ControlUsing Screen Lock Using RelayPlayback via various mode PlaybackVarious playback modes Playback via split screenPlayback with Digital Zoom Button control Using Search ModeCopy Image Copy / Backup / Delete Data ManagerSeconds Select DiskStart Date & Time / End Date & Time Backup ManagerQuick Setup ConfigurationDelete Data Date/TimeDaylight Saving Time ZoneTime Format Date/TimeRecording Channel Status Configuration StatusRecording Speed/Quality Audio RecordingName Camera Analog Camera Channels Ch ~ ChTIP Type StatusColor Gain/Brightness/ContrastTime Schedule Normal Rec. Analog Camera Channels Ch ~ ChWeekday Start/End Setting Time ScheduleDay Start/End Special Time RecordingEvent Recording Setting Special TimeSensor 1/2/3/4 Alarm Rec. Analog Camera Channels Ch ~ ChMD Area Text Setting MD AreaPre Alarm sec Post Alarm sec Special Time SetupRelay Monitor Seq. SwitchingsecAlarm Pop-up/Pop-up Holdsec Audio SystemRecording / Monitoring TextSync Text With DeviceSeek Header Timeout msDelimiter LinesTo designate Weekday/Weekend and Day/Night Time ScheduleSpecial Time Admin Password User PasswordRemote Setup SecurityAuto Del. Alarm Disk SetupBackup Reminder Auto Del. NormalNetwork NetworkDNS Server IP Address IP Address, NetMask, and Gateway AddressXDSL User ID/PasswordHRS Interval HRSGroup ID Firewall / Port Monitoring Port / Playback PortTP Server Port Baud rate/Parity/Stop bit/Data bit Serial SetupInterface Miscellaneous Remote Control IDHow to register remote controller Reset Values Alarm BuzzerKeyboard Control Addr Keyboard PTZ AddrUtility Disk Manager Type Activating IP Cam menus Using IP CamConfiguration Camera Setting IP Camera Channels Ch ~ ChBand Width LimitKB/s IP AddressURLPort Select Cam Local IP Cam ListSearch Normal Rec. IP Camera Channels Ch ~ Ch IP Cam Event Alarm Rec. IP Cam Channel Ch ~ ChRecording Speed/Quality & Pre Alarm & Post Alarm Setting at Text menu Connecting External DeviceUsing Text Device Setting at Alarm Rec. menu Setting at Serial Setup’s RS232 menuSetting at Normal Rec. menu Setting at Serial Setup’s PTZ menu Using KeyboardAppendix Appendix #1 Technical Specification Appendix Appendix #2.1 Introduction Appendix #2 Utilizing IP Addresses on Local Network#2.2 IP construction and Network class IP construction#2.3 C-class Network Features of AddressesNetwork configuration To use as one network To use as three sub-networks 1/4 + 1/4 + 1/2 To use as two sub-networks 1/2 + 1/2To use as four sub-networks 1/4 + 1/4 + 1/4 + 1/4 Appendix