Rugged Outback ELX4-60 manual Viewing an alarm triggered channel, Viewing images with Digital Zoom

Page 14

ELX4 -60

BASIC CONFIGURATION

3.5. Viewing an alarm triggered channel

-When an alarm is triggered, the related channel will pop-up full screen automatically.

-Set ‘Alarm Pop -up Screen’ function to “On” in “Configuration” under the “Monitor” tab , and set the display duration in “Pop-up Hold (sec)”

-If more than one channel is triggered by an alarm, the related channels will be displayed simultaneously in a split -screen. In order to move current screen, press any button.

3.6. Viewing images with Digital Zoom

-In Single Full Screen mode, live and recorded images can be expanded using the Digital Zoom feature.

-To enable the digital zoom, press the [ZOOM] button.

-Digital Zoom will expand the image to twice its normal size.

-Default location of the digital zoom is in the center of screen. The zoom box can be moved each 10th

step to left and right and 4t h step up and down.

-To move the zoom box, use the [Arrow] button.

-To cancel the zoom box, press the [ZOOM] button once more.

3.7. Viewing with connected PTZ

-Pan/Tilt/Zoom (PTZ) devices can be controlled through the ELX4 -60 when a PTZ device is connected and properly configured under “Serial Setup.”

-While in Monitor mode, press the [SELECT] button.

-Channel selection icon will be displayed.

-Move the icon to the channel t o contr ol with the [Arrow] button.

-Press the [MENU] button.

-PTZ menu (Pan/Tilt, Zoom/Focus, Load Preset, Save Preset) will appear.

-Press the [ENTER] button after selecting the desired function.

14

2003.05.21 (v 1.0)

Rugged CCTV

Image 14

Contents ELX4-60 User’s Guide Cctv Monitor UserFCC Compliance Statement Important Notice ELX4 Rugged CctvSetting at Text menu Setting at Serial Setup’s RS232 menu Appendix #2 Utilizing IP Addresses on Local Network What is ELX4-60? IntroductionKey features ELX4-60Product Description Front PanelRear Panel DIO Installation Summary Viewing single full screen MonitoringViewing basic screen Quad-split Viewing multi screenViewing all channels with sequence mode Viewing with connected PTZ Viewing an alarm triggered channelViewing images with Digital Zoom Pan/Tilt Control Load PresetSave Preset Zoom/Focus ControlPlayback via various mode Using RelayUsing Screen Lock PlaybackVarious playback modes Playback via split screenPlayback with Digital Zoom Using Search Mode Button controlSeconds Copy / Backup / Delete Data ManagerCopy Image Select DiskBackup Manager Start Date & Time / End Date & TimeDelete Data ConfigurationQuick Setup Date/TimeTime Format Time ZoneDaylight Saving Date/TimeRecording Recording Speed/Quality Configuration StatusChannel Status Audio RecordingCamera Analog Camera Channels Ch ~ Ch NameTIP Color StatusType Gain/Brightness/ContrastNormal Rec. Analog Camera Channels Ch ~ Ch Time ScheduleDay Start/End Setting Time ScheduleWeekday Start/End Special Time RecordingSetting Special Time Event RecordingSensor 1/2/3/4 Alarm Rec. Analog Camera Channels Ch ~ ChMD Area Text Setting MD AreaPre Alarm sec Post Alarm sec Special Time SetupRelay Monitor Seq. SwitchingsecAlarm Pop-up/Pop-up Holdsec System AudioSync Text With TextRecording / Monitoring DeviceDelimiter Timeout msSeek Header LinesTime Schedule To designate Weekday/Weekend and Day/NightSpecial Time Remote Setup User PasswordAdmin Password SecurityBackup Reminder Disk SetupAuto Del. Alarm Auto Del. NormalNetwork NetworkIP Address, NetMask, and Gateway Address DNS Server IP AddressUser ID/Password XDSLHRS HRS IntervalGroup ID Firewall / Port Monitoring Port / Playback PortTP Server Port Baud rate/Parity/Stop bit/Data bit Serial SetupInterface Miscellaneous Remote Control IDHow to register remote controller Keyboard Control Addr Alarm BuzzerReset Values Keyboard PTZ AddrUtility Disk Manager Type Using IP Cam Activating IP Cam menusCamera Setting IP Camera Channels Ch ~ Ch ConfigurationBand Width LimitKB/s IP AddressURLPort Select Cam Local IP Cam ListSearch Normal Rec. IP Camera Channels Ch ~ Ch IP Cam Event Alarm Rec. IP Cam Channel Ch ~ ChRecording Speed/Quality & Pre Alarm & Post Alarm Setting at Text menu Connecting External DeviceUsing Text Device Setting at Serial Setup’s RS232 menu Setting at Alarm Rec. menuSetting at Normal Rec. menu Using Keyboard Setting at Serial Setup’s PTZ menuAppendix Appendix #1 Technical Specification Appendix Appendix #2.2 IP construction and Network class Appendix #2 Utilizing IP Addresses on Local Network#2.1 Introduction IP construction#2.3 C-class Network Features of AddressesNetwork configuration To use as one network To use as two sub-networks 1/2 + 1/2 To use as three sub-networks 1/4 + 1/4 + 1/2To use as four sub-networks 1/4 + 1/4 + 1/4 + 1/4 Appendix