Rugged Outback ELX4-60 manual Normal Rec. IP Camera Channels Ch ~ Ch

Page 59

ADVANCED CONFIGURATION

ELX4 -60

6.3. Normal Rec. – IP Camera Channels (Ch. 5 ~ Ch. 16)

This menu is for configuring the normal recording settings based on channel and timetable. IP Cams can not be setup with Quick Setup menu. All conditions for recording IP camera channel s are set only by Normal recording and Alarm recording menus.

These settings are same as with the analog channels .

Rugged CCTV

2003.05.21 (v 1.0)

59

Image 59

Contents User’s Guide Cctv Monitor User ELX4-60FCC Compliance Statement Important Notice Rugged Cctv ELX4Setting at Text menu Setting at Serial Setup’s RS232 menu Appendix #2 Utilizing IP Addresses on Local Network Introduction What is ELX4-60?ELX4-60 Key featuresFront Panel Product DescriptionDIO Rear PanelInstallation Summary Viewing multi screen MonitoringViewing basic screen Quad-split Viewing single full screenViewing all channels with sequence mode Viewing with connected PTZ Viewing an alarm triggered channelViewing images with Digital Zoom Zoom/Focus Control Load PresetSave Preset Pan/Tilt ControlPlayback Using RelayUsing Screen Lock Playback via various modeVarious playback modes Playback via split screenPlayback with Digital Zoom Button control Using Search ModeSelect Disk Copy / Backup / Delete Data ManagerCopy Image SecondsStart Date & Time / End Date & Time Backup ManagerDate/Time ConfigurationQuick Setup Delete DataDate/Time Time ZoneDaylight Saving Time FormatRecording Audio Recording Configuration StatusChannel Status Recording Speed/QualityName Camera Analog Camera Channels Ch ~ ChTIP Gain/Brightness/Contrast StatusType ColorTime Schedule Normal Rec. Analog Camera Channels Ch ~ ChSpecial Time Recording Setting Time ScheduleWeekday Start/End Day Start/EndEvent Recording Setting Special TimeSensor 1/2/3/4 Alarm Rec. Analog Camera Channels Ch ~ ChMD Area Text Setting MD AreaPre Alarm sec Post Alarm sec Special Time SetupRelay Monitor Seq. SwitchingsecAlarm Pop-up/Pop-up Holdsec Audio SystemDevice TextRecording / Monitoring Sync Text WithLines Timeout msSeek Header DelimiterTo designate Weekday/Weekend and Day/Night Time ScheduleSpecial Time Security User PasswordAdmin Password Remote SetupAuto Del. Normal Disk SetupAuto Del. Alarm Backup ReminderNetwork NetworkDNS Server IP Address IP Address, NetMask, and Gateway AddressXDSL User ID/PasswordHRS Interval HRSGroup ID Firewall / Port Monitoring Port / Playback PortTP Server Port Baud rate/Parity/Stop bit/Data bit Serial SetupInterface Miscellaneous Remote Control IDHow to register remote controller Keyboard PTZ Addr Alarm BuzzerReset Values Keyboard Control AddrUtility Disk Manager Type Activating IP Cam menus Using IP CamConfiguration Camera Setting IP Camera Channels Ch ~ ChBand Width LimitKB/s IP AddressURLPort Select Cam Local IP Cam ListSearch Normal Rec. IP Camera Channels Ch ~ Ch IP Cam Event Alarm Rec. IP Cam Channel Ch ~ ChRecording Speed/Quality & Pre Alarm & Post Alarm Setting at Text menu Connecting External DeviceUsing Text Device Setting at Alarm Rec. menu Setting at Serial Setup’s RS232 menuSetting at Normal Rec. menu Setting at Serial Setup’s PTZ menu Using KeyboardAppendix Appendix #1 Technical Specification Appendix Appendix IP construction Appendix #2 Utilizing IP Addresses on Local Network#2.1 Introduction #2.2 IP construction and Network class#2.3 C-class Network Features of AddressesNetwork configuration To use as one network To use as three sub-networks 1/4 + 1/4 + 1/2 To use as two sub-networks 1/2 + 1/2To use as four sub-networks 1/4 + 1/4 + 1/4 + 1/4 Appendix