INSTALLATION
Rack-Mount Setup
The UPS can be installed in
C A U T I O N
The UPS and EBM are heavy (see page 61). A minimum of two people are required to lift the cabinets into the rack.
NOTE Mounting rails are required for each UPS and EBM cabinet. If rails are not already installed in your rack, contact your local distributor to order rail kits.
To install the UPS and optional EBMs in a rack:
1.Place the UPS on a flat, stable surface with the front of the UPS facing toward you.
2.Attach the supplied mounting handles to the mounting brackets and secure with the supplied screws (see Figure 5).
3.Align the mounting brackets with the screw holes on the side of the UPS and secure with the supplied screws (see Figure 5).
4.If installing optional EBMs, repeat Steps 1 through 3 for each cabinet.
Mounting
Bracket
Mounting
Handle
Figure 5. Installing the Mounting Handles and Brackets
EATON Powerware® 9125 | 17 |
www.powerware.com |
|