SUPER MICRO Computer 6014L-T user manual Preface, About This Manual, Manual Organization

Preface

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 6014L-T. Instal- lation and maintenance should be performed by experienced technicians only.

The SuperServer 6014L-T is a high-end dual processor rackmount server based on the SC811LT-260 1U rackmount server chassis and the Super X6DLP-EG2 serverboard. The X6DLP-EG2 supports Intel® Xeon® LV or ULV processors in 479-pin PGA sockets.

Manual Organization

Chapter 1: Introduction

The fi rst chapter provides a checklist of the main components included with the serv- er system and describes the main features of the Super X6DLP-EG2 serverboard and the SC811LT-260 chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6014L-T into a rack and check out the server confi guration prior to powering up the system. If your server was ordered without the processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system.

iii