Appendix C: Software Installation
To run the Adaptec RAID Confi guration utility, do to the following:
1.Enable the RAID function in the system BIOS (refer to Chapter 7 for System BIOS Confi gurations).
2.Press the <Ctrl> and <A> keys simultaneously when prompted to do so during system boot. (Refer to the previous page for detailed instructions.)
Using the Array Configuration Utility (ACU)
When you press <Ctrl> and <A> keys simultaneously at the prompt during system bootup, the main menu will appear as seen below.
Note: To select an option, use the arrow keys to highlight the item and then press the <Enter> key to select it. To return to the previous menu, press the <Esc> key.