Chapter 5: Advanced Serverboard Setup
Removing the Heatsink
1.Using a Phillips screwdriver to remove the heatsink screws from the serverboard (remove diagonal screws fi rst, as show in the picture on the right).
Screw# 1
Screw# 2
2.Hold the heatsink and gently wriggle the heatsink to loosen it from the processor. (Do not use excessive force when wriggling the heatsink!!)
3.Once the heatsink has been loosened, re- move the heatsink from the processor.
4.Clean the surface of the processor and the heatsink to get rid of the old thermal grease. Reapply the proper amount of thermal grease before you