MS7220 STANDS
Vertical Stand Installation [ MLPN 46-46405 ]
Remove the three screws securing the cable cover to the unit and slide it up and off the scanner. Disconnect the cable and slide the horizontal stand up and off the unit.
Disassemble the horizontal stand and remove the horizontal cover plate.
Mounting the MS7220: Peel off the base plate’s tape backing and affix it to the countertop or drill four #39 pilot holes and secure the base plate to the countertop with the four #8 wood screws provided.
Replace the horizontal base cover with the vertical base cover [
Move the side cover from the vertical to the horizontal position on the unit.
Slide the vertical stand onto the unit.
Reattach the cable and secure the cable cover with the three M3 screws.
38
