TROUBLESHOOTING GUIDE (CONTINUED)
SYMPTOMS
POSSIBLE CAUSE(S)
SOLUTION
Scanner beeps at some bar codes and NOT for others of the same bar code symbology
The bar code may have been printed incorrectly
Check if it is a check digit/character/or border problem
Scanner beeps at some bar codes and NOT for others of the same bar code symbology
The scanner is not configured correctly for this type of bar code
Check if check digits are set properly
Scanner beeps at some bar codes and NOT for others of the same bar code symbology
The minimum symbol length setting does not work with the bar code
Check if the correct minimum symbol length is set
Keyboard Wedge Only |
| |
The unit scans | Configuration is not | Make sure the scanner is |
the bar code | correct | configured for the |
but there is no |
| appropriate mode. |
data |
|
|
|
|
|
The unit scans | Configuration is not | Make sure that the proper |
but the data is | correct | PC type AT, PS2 or XT is |
not correct |
| selected. Verify correct |
|
| country code and data |
|
| formatting are selected. |
|
| Adjust intercharacter delay |
|
| SYMPTOM |
|
|
|
The unit is transmitting each character
Configuration is not correct
Increase the interscan code delay setting. Adjust whether the F0 break is transmitted. It may be necessary to try this in both settings.
24
