Manuals / Metrologic Instruments / Home Audio / Speaker

Metrologic Instruments MS7220 manual Getting Started, Tools needed Phillips head screwdriver

Models: MS7220

1 49

Download 49 pages 19.8 Kb

Page 6

GETTING STARTED

GETTING STARTED

Tools needed:

•Phillips head screwdriver

•¼”-20 wrench

•Drill with a #39 drill bit (drill for hard-mount installation only)

Slide off the cable cover.

Slide off the horizontal stand.

Slide on the cable door and remove the foam insert.

Loosen the lock nut, push back the metal base plate and then slide the cable through the cable opening.

Mounting the MS7220: Peel off the base plate’s tape backing and affix it to the countertop or drill four #39 pilot holes and secure the base plate to the countertop with the four #8 wood screws provided.

Continued on next page.

3

Image 6

Metrologic Instruments MS7220 Getting Started, Tools needed Phillips head screwdriver, ¼”-20wrench, Continued on next page

Contents

METROLOGIC INSTRUMENTS, INC Installation and User’s GuideMS7220 ArgusSCAN Presentation Laser Scanner LOCATIONS TABLE OF CONTENTS INTRODUCTION MetroSelect Programming Guide** MLPN 00-02407or SCANNER AND ACCESSORIESStand Alone Keyboard Wedge Powerlink Cable MLPN Stand¼”-20wrench GETTING STARTEDTools needed Phillips head screwdriver Continued on next pagePage INSTALLATION FOR OCIA INTERFACE To power the unit with an external power supplyINSTALLATION FOR OCIA INTERFACE CONTINUED To power the unit from the host deviceINSTALLATION FOR KEYBOARD WEDGE INTERFACE INSTALLATION FOR STAND-ALONE KEYBOARD INTERFACE INSTALLATION FOR RS232 OR LIGHT PEN INTERFACES 9. Turn on the host systemFor RS232 Communication For Light Pen CommunicationStep 10, page 9 continued INSTALLATION OF AN AUXILIARY SCANNER Figure 6 Master/Slave Setup ConnectSide Cover ‘Cable Door ’Cable Jack Cover SCANNER PARTSŒOutput Window Red LED ŽGreen LED Speaker “Horizontal Mount BaseTHE MULTI-FUNCTION BUTTON One Beep AUDIBLE INDICATORSThree Beeps - on power up Razzberry ToneFlashing Green and One Razzberry Tone Three Beeps - on power upFAILURE MODES Flashing Red and Green and Two Razzberry TonesSteady Green and Single Red Flash No Red or Green LEDSteady Green Steady Green and Steady RedMAINTENANCE LABELSSpecifications subject to change without notice Depth of Field defaultDEPTH OF FIELD SPECIFICATIONS Figure 10 Top View of Depth of FieldFigure 12 Top View of Depth of Field Depth of Field DefaultMinimum Bar Code Element Width milsFigure 13: Side View of Depth of Field Depth of Field DefaultMinimum Bar Code Element Width milsSOLUTION MS7220 Series Troubleshooting GuideSYMPTOMS POSSIBLE CAUSESSOLUTION TROUBLESHOOTING GUIDE CONTINUEDSYMPTOMS POSSIBLE CAUSESPOSSIBLE CAUSES SYMPTOMSSOLUTION Keyboard Wedge OnlyPOSSIBLE CAUSES SYMPTOMSSOLUTION RS-232OnlyPOSSIBLE CAUSES SYMPTOMSSOLUTION Slave operationRS232 DEMONSTRATION PROGRAM Communication Protocols ScannerVersion IdentifierDESIGN SPECIFICATIONS Input Voltage DEFAULT SETTINGS DEFAULT SETTINGS CONTINUED Convert EAN-8to EAN Page Page Default settings for “Aux” interface MS7220 STANDS Vertical Stand Kit MLPNOptional Flex Stand Kit MLPN Vertical Stand Installation MLPN MS7220 STANDSOptional Flexible Stand Installation MLPN MS7220 STANDSPin Function Scanner Pinout ConnectionsMS7220-12 OCIA MS7220-12Keyboard Wedge or Stand-KeyboardStand Alone Keyboard Powerlink Cable Cable Connector Configurations“Standard” PowerLink cable 9-pin D-typefemale connector to the PCPin Function Cable Connector ConfigurationPowerLink Cable 5-pinFemale DIN 6-pinMale Mini-DINLIMITED WARRANTY Corporate HeadquartersGermany Remarque AchtungAttenzione European Standard NOTICES CONTINUEDPATENTS Funkstöreigenschaften nach EN 55022 1998 WarnungINDEX