SPX Cooling Technologies CS4000 manual Editing VSMain.ini for an Ethernet Network

CS4000 Mini Controller with Ethernet

Editing VSMain.ini for an Ethernet Network

When you are using the Ethernet link, you must also change VSMain.ini manually. In the following example, shown in Figure 5-16,VSMain.ini is configured to talk to four Tool Control Modules (TCMs) at IP addresses 10.1.100.167 through 10.1.100.170.

[Communications]

Detachable=0

#Ports=4

CommOcx1=Ethernet

CommOcx2=Ethernet

CommOcx3=Ethernet

CommOcx4=Ethernet

[Comm1Devices]

#Devices=1

Device1=DCM

Device1IPAddress=10.1.100.167

[Comm2Devices]

#Devices=1

Device1=DCM

Device1IPAddress=10.1.100.168

[Comm3Devices]

#Devices=1

Device1=DCM

Device1IPAddress=10.1.100.169

[Comm4Devices]

#Devices=1

Device1=DCM

Device1IPAddress=10.1.100.170

[Readings Database]

Enabled=1

ConnectionString=Provider=Microsoft.Jet.OLEDB.4.0;Data

Source=C:\VS\VsDCM Readings.mdb;Persist Security

Info=False

Limit=20000

[Programs To Start]

Program1=VsStart.exe

Figure 5-16. VSMain.ini configured for an Ethernet Network

NOTE: For a detailed technical description of each section of VSMain.ini, refer to the Visual Supervisor User’s Guide (part number 39-30-34823).