SMC Networks 10/100 manual Specifying Trap Managers and Trap Types

CONFIGURING THE SWITCH

Web – Click SNMP, SNMP Configuration. Add new community strings as required, select the access rights from the Access Mode drop-down list, then click Add.

CLI – The following example adds the string “spiderman” with read/write access.

Console(config)#snmp-server community spiderman rw	3-54
Console(config)#

Specifying Trap Managers and Trap Types

Traps indicating status changes are issued by the switch to specified trap managers. You must specify trap managers so that key events are reported by this switch to your management station (using network management platforms such as HP OpenView). You can specify up to five management stations that will receive authentication failure messages and other trap messages from the switch.

2-84